Raypak PS-4 PS-8 installation manual FCC Statement, Industry Canada Statement, Interference

Page 30

3.Once the heater is running, you can verify the “heater cooldown” feature (optional - see Configuration Menu/Heater Config.) is operating properly:

•Press the “Filter” button once (for 2 speed pumps, this may require 2 pushes of the “Filter” button)

•The heater should turn off (“Heater” LED off) and the “Filter” LED will flash to indicated heater cooldown is active.

•The display will periodically indicate that the filter pump is on for heater cooldown and show the minutesremaining

•The pump will automatically turn off at the end of the 15 minute heater cooldown period.

For more detailed instructions on control and operation of theAqua Logic system, refer to the Operation Manual.

Service Mode

Service mode disables all automatic control operation and is intended to be used when servicing the pool system. To enter service mode, push the SERVICE button once on the main unit keypad. This will initially turn all outputs off and then allow you to turn outputs on/off manually at the main display (only). In service mode, the buttons on the optional remote display/keypad and the optional spaside remote will turn outputs off, but will not turn any output on. Heater control outputs and solar control outputs are prevented from turning on if the water temperature exceeds 104ºF (40ºC).

Pushing the SERVICE button twice will enter a timed service mode. Service operation as described above will continue for 3 hours, then automatically return to normal operation.

Push the SERVICE button once more to exit out of Service mode.

FCC Statement

(Compliance Statement, Part 15.19): This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING (Part 15.21): Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Industry Canada Statement

The term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, then the user is encouraged to try to correct the interfer- ence by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and the receiver

•Connect the equipment into a power source on different circuit than the receiver.

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Aqua Logic Important Safety Instructions Table of Contents What’s Included Before installing the Aqua Logic SystemBefore You Begin What’s not IncludedInstallation Steps Plumbing RequirementsElectrical Requirements General Water Chemistry Water ChemistrySalt Salt LevelGallons Liters Temperature Sensors Optional Wired Remote Display/KeypadAqua Logic Control Center Optional Wireless Remote Display/Keypad Optional Base ReceiverOptional Valve Actuators Plumbing General Pool EquipmentFlow Switch Turbo CellElectrical Wiring Main Service Power to the Circuit Breaker SubpanelGrounding and Bonding Circuit Breaker Installation and WiringAqua Logic Control Power General Purpose OutletHigh Voltage 120/240V Pool Equipment 240 VAC 120 VACLow Voltage Wiring ValveActuatorsHeater Control Generic Heaters Laars Heaters most models except LXHayward Heaters Pentair/Purex/MiniMaxRaypak RP2100 Pool/Spa Heater STA-RITE HeaterTemperature Sensors Wired Remote Display/KeypadFlow Switch Base ReceiverTurbo Cell To access the Configuration Menu Accessing the Configuration MenuConfiguration Menu Items ChlorinatorHeater Cooldown Heater1Heater Name Heater ExtendSolar Priority SolarSolar Extend Pool/SpaLights Name Spa SpilloverFilter Operation Lights FunctionAux1 Name Aux1 FunctionValve3 Name Aux1 InterlockAux1 Freeze Protection Valve3 FunctionValve3 Interlock Valve3 Freeze ProtectionBefore Startup Program Automatic OperationHeater Checkout FCC Statement Industry Canada StatementInterference Limited Warranty-Pool Automation & Chlorination Products Aqua Logic Programming Flow Chart

PS-4 PS-8 specifications

Raypak, a leader in the heating and water temperature control industry, offers a robust line of products featuring state-of-the-art technology and efficiency. Among its notable offerings are the Raypak PS-4 and PS-8 models, which are designed to meet a variety of heating demands in residential and commercial settings.

The Raypak PS-4 and PS-8 are both part of the Performance Series and are designed for versatility. These models utilize high-efficiency gas burners that not only maximize heat output but also minimize fuel consumption. This efficiency is crucial for both cost savings and environmental sustainability, making these heaters an excellent choice for mindful consumers and businesses.

One of the standout features of the PS-4 and PS-8 is their user-friendly digital display, which provides real-time information about system performance. This allows users to easily monitor and adjust settings, ensuring optimal operation at all times. Additionally, these models come equipped with advanced diagnostics that aid in troubleshooting and maintenance, reducing downtime and improving overall system reliability.

The PS-4 model has a heating capacity of up to 400,000 BTU, while the PS-8 boasts an impressive capacity of 800,000 BTU. This wide range of output makes them suitable for a variety of applications, from residential pools to large commercial facilities. Both models feature a durable, rust-resistant cabinet designed to withstand the elements, further enhancing their longevity and performance.

In terms of technology, both heaters are designed with an innovative control system that allows for precise temperature management. Additionally, they feature a built-in fan, which helps distribute heat evenly throughout the space. This ensures that users enjoy consistent temperatures, whether in a pool or spa setting.

The PS-4 and PS-8 models also focus on safety, incorporating multiple safety mechanisms such as high limit sensors and a robust electronic ignition system. These features help prevent issues such as overheating and ensure the system operates safely and reliably.

In conclusion, the Raypak PS-4 and PS-8 models exemplify modern engineering in the heating industry. With their combination of high efficiency, advanced technology, and user-friendly design, they are excellent choices for anyone looking to improve their heating solutions in both residential and commercial applications. Whether for pool heating or spa use, the Raypak heaters promise reliability, performance, and long-lasting service.
Top Page Image Contents