Raypak H-0090B, H-0042B, H-0030B, H-0180B Lighting Instructions for Automatic Ignition Models, Set

Page 2

don't try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this boiler if any part has been under water. Immediately call a qualified service technician to inspect the boiler and to replace any part of the control system and any gas control which has been under water.

FOR STANDING PILOT MODELS WITH ROBERT- SHAW GAS VALVE, 2 STAGE OPERATION. (Models 90, 135 & 180)

1. STOP! Read the safety information.

2. Set the thermostat to the lowest setting.

3. Turn off all electric power to the appliance.

4. Push in and move gas control lever counter-

clockwise

to "OFF" position.

GAS CONTROL

 

 

LEVER SHOWN

 

 

IN "OFF" POSITION

 

 

GAS INLET

 

 

Fig.#8934.0

 

 

 

 

 

NOTE: Lever cannot be moved from "ON" to "OFF" unless lever is pushed in slightly. Do not force.

5. Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above on this label. If your don't smell gas, go to the next step.

6. Locate pilot mounted on the right side of the burner drawer, and right of first burner.

THERMOCOUPLETHERMOCOUPLE

ROBERTSHAW PILOT

HONEYWELL PILOT

Fig.#8084.1

 

Fit. # 8083.0

7. Move control lever clockwise to

"SET"

position and immediately light pilot with a match. 8. Hold lever in "SET" position for 1/2 minute after

pilot is lit. Release lever, and it will spring back to "PILOT" position Pilot should remain lit. If it goes out, repeat steps 4 through 8.

*If lever does not spring back to "PILOT" position when released, stop and immediately call your

service technician or gas supplier.

*If the pilot does not stay lit after several tries, move the gas control lever to "OFF" and call your service technician or gas supplier.

9. Stand to the side of the heater and move the gas

control lever counterclockwise

to "ON".

10.Turn on all electric power to the appliance.

11.Set the thermostat to the desired setting.

TO TURN OFF GAS TO THE BOILER

1. Set the thermostat to the lowest setting.

2.

Turn off all electric power to the appliance.

3.

Push in and move gas control lever counter-

 

clockwise

to "OFF" position. Do not

 

force.

 

LIGHTING INSTRUCTIONS FOR AUTOMATIC IGNITION MODELS.

Please read carefully and understand the following safety information before operating the boiler.

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing prop- erty damage, personal injury or loss of life.

A.This boiler does not have a pilot. It is equipped with a hot surface ignition device which automatically lights the burners. Do not try to light the burners by hand.

B.BEFORE OPERATING smell all around the boiler area for gas. Be sure to smell next to the floor because some gases are heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

*Do not try to light any appliance.

*Do not touch any electric switch;

*Do not use any phone in your building.

*Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

*If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in, move or turn the gas control knob or lever. Never use tools. If the knob or lever will not push in, move or turn by hand, don't try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this boiler if any part has been under water. Immediately call a qualified service technician to inspect the boiler and to replace any part of the control system and any gas control which has been underwater.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Blocked Vent SHUT-OFF System What to do if YOU Smell GASLighting Instructions for Standing Pilot Models What to do if YOU Smell GASTo Turn OFF GAS to the Boiler Lighting Instructions for Automatic Ignition ModelsSET Honeywell Pilot Inspection and Maintenance ProceduresTo Turn OFF GAS to Boiler Blue FlameSystem Shut Down Procedure Soot Corrosion Disengaged

H-0135B, H-0066B, H-0180B, H-0090B, H-0030B specifications

Raypak is a renowned name in the heating and cooling industry, particularly recognized for its innovative residential and commercial pool heaters. Among its diverse lineup, the H-series models, including the H-0030B, H-0180B, H-0066B, H-0135B, and H-0042B, stand out for their advanced features, robust performance, and user-friendly design.

The H-0030B is an entry-level model designed for smaller pools and residential applications. It boasts a compact design and is remarkably energy-efficient, featuring a copper heat exchanger that enhances heat transfer while minimizing energy consumption. Its straightforward controls allow for easy operation, making it a top choice for homeowners seeking a reliable heating solution.

The H-0180B offers a step up in performance and capacity, perfect for medium to larger pools. This model is equipped with a unique digital thermostat that provides precise temperature control, ensuring water warmth without unnecessary energy expenditure. It also integrates advanced safety features, including a pressure switch to prevent operation when the water flow is insufficient.

The H-0066B model strikes a balance between efficiency and power. It utilizes a powerful fan-forced convection system, allowing for rapid heating. This model is particularly appreciated for its low NOx emissions, meeting stringent environmental regulations while providing robust heating capabilities.

The H-0135B contributes notable power, ideal for larger commercial pools or high-demand residential setups. Its advanced control system enables users to set and maintain desired temperatures with ease. Moreover, the H-0135B is designed for longevity, incorporating durable materials to withstand various weather conditions.

Finally, the H-0042B caters to those in search of a high-capacity heater. With an enhanced thermal efficiency rating, this model guarantees lower operational costs and faster heating times. It features an easy-to-read LCD display, allowing users to monitor and adjust settings effortlessly.

In summary, the Raypak H-series models combine modern technology and user-friendly features, ensuring efficient heating for pools of all sizes. Their commitment to energy efficiency, safety, and durability makes them a top choice for both residential and commercial applications. Whether you're a homeowner looking to extend your swimming season or a business needing reliable heating, these models provide excellent performance tailored to your specific needs.
Top Page Image Contents