Datalogic Scanning 1400I manual Error Codes

Error Codes

Error Codes

Upon startup, if the scanner flashes its indicator LED or sounds an unexpected series of beep tones (other than normal power-up indications), this means the scanner has not passed its auto- matic Selftest and has entered FRU1 isolation mode. If the scanner is reset or the button is pressed, the sequence will be repeated. The following table describes the LED flashes/beep codes associated with an error found.

NUMBER OF
LED FLASHES/	ERROR	CORRECTIVE ACTION
BEEPS
1	Configuration
2	Interface PCB
6	Main PCB
10	Button Error
11	Near Field
	Imager Module	Contact Helpdesk for assistance
12	Far Field
	Imager Module
13	Software ID
	Failure
14	CPLD/Code
	Mismatch

1. Field Replaceable Unit (FRU)

Product Reference Guide 1-5