Datalogic Scanning 1400I manual Supported Symbologies, Wand Emulation Bar Code Format

Interface Related Features

Wand Emulation

Supported Symbologies

The Wand Emulation interface will transmit bar code data as a wand device would. This inter- face will transmit the following bar code symbologies:

•UPC/EAN

•UPC/EAN with addons

•Code 39

•Full ASCII Code 39

•Interleaved 2 of 5

•Codabar

•Code 128

Pharmacode 39 is transmitted as Code 39. All other bar code symbology types read by the scan- ner will be transmitted as Code 128.

Wand Emulation Bar Code Format

The following format settings are required for the wand emulation interface. These settings have been pre-configured at the factory for Wand Emulation scanners.

•UPC-A bar codes must include all 12 digits.

•UPC-E bar codes must contain 8 digits, including a system digit, 6 data digits, and the check digit.

•EAN-13 bar codes must have all 13 digits.

•EAN-8 bar codes must include all 8 digits.

•Code 39, Code 39 Full ASCII, and Pharmacode 39 bar codes must NOT contain start / stop characters.

•Codabar bar codes must include the start / stop characters, presented in the ABCD for- mat.

•Interleaved 2 of 5 bar codes must have an even number of digits.

3-26 Magellan® 1400i