HIGH VOLUME ROOF VENT (OPTIONAL)
Manufacturer:
The optional
OPERATING INSTRUCTIONS:
1)Open dome approx. 3” or more (ceiling fan has a built in safety switch that will not allow motor to operate unless dome is partially open).
2)Turn 3- speed knob to desired performance lever
3)Open a window or door for airflow,
4)Source of airflow is determined by the window(s) or door(s) opened. For best results, close all roof vents and open 1 (one) window the greatest distance from your
CAUTION: Never place Lindeen™ or a like cover over ceiling fan. Greatly restricted airflow & increased sound levels will occur.
Appliances
WHEN EQUIPPED WITH REVERSE SWITCH
1)Turn fan motor off by:
a)Setting
b)Closing Dome.
c)Selecting center position on IN/OUT rocker switch
2)Wait for fan blade to stop.
3)Select IN position, brings air from the roof area into your coach (pressurizes inside).
4)Or select OUT position, brings air in through any or all openings in coach and exhausts through the roof. 5) Turn fan motor On.
WHEN EQUIPPED WITH THERMOSTAT:
1)Follow “Operating Instructions: 1 thru 4
2)Select desired temperature or comfort level on thermostat. Fan motor will now start & stop automatically as interior temperature of coach exceeds or drops below selected level.
NOTE: Fan motor will not start if temperature selected is warmer than interior tempera- | H |
| |
ture of coach. |
|
CLEANING INSTRUCTIONS: |
|
1)Turn fan motor Off.
2)Remove 8 painted flathead Phillips screws around perimeter of screen insert only.
3)Clean screen with soap & water solution and reinstall.
H - 5