
Specifications
General |
| AM Radio |
|
Power supply | : DC 12 V (11 V – 16 V), test | Frequency range | : 530 kHz – 1 710 kHz |
| voltage 14.4 V, negative | Usable sensitivity | : 27 dB/µV (22 µV, S/N 20 dB) |
| ground |
|
|
Current consumption | : Less than 2.1 A (CD mode, | CD Player |
|
| 0.5 W | Sampling frequency | : 8 times oversampling |
Maximum power output | : 50 W x 4 (at 1 kHz) | DA converter | : 1 bit DAC system |
| volume control maximum | : Astigma | |
Tone adjustment range | : Bass: ± 12 dB (at 100 Hz) | Light source | : Semiconductor laser |
| Treble: ± 12 dB (at 10 kHz) | Wave length | : 790 nm |
Speaker impedance | : 4 – 8 Ω | Frequency response | : 20 Hz – 20 kHz (±1 dB) |
: 2.5 V (CD mode, 1 kHz, 0 dB) | Signal to noise ratio | : 96 dB | |
: 200 Ω | Total harmonic distortion | : 0.01 % (1 kHz) | |
Dimensions (W x H x D) | : 178 x 50 x 160 mm | Wow and flutter | : Below measurable limits |
Channel separation | : 75 dB | ||
| {7 ” x 1 15/16 ”x 6 5/16”} |
|
|
Weight | : 1.4 kg {3 lbs. 1 oz} |
|
|
|
|
|
|
FM Stereo Radio |
|
|
|
Frequency range | : 87.9 MHz – 107.9 MHz |
|
|
Usable sensitivity | : 10.2 dBf (0.9 µV, 75 Ω) |
|
|
50 dB quieting sensitivity | : 15.2 dBf (1.6 µV, 75 Ω) |
|
|
Frequency response | : 30 Hz – 15 kHz (±3 dB) |
|
|
Alternate channel selectivity : 75 dB |
|
| |
Stereo separation | : 35 dB (1 kHz) |
|
|
Image rejection ratio | : 55 dB |
|
|
IF rejection ratio | : 100 dB |
|
|
Signal to noise ratio | : 62 dB |
|
|
|
|
|
|
|
|
|
|
Above Specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 Ω)
Note:
¡Specifications and design are subject to modification without notice due to improvements. ¡Some figures and illustrations in this manual may be different from your product.
E
N
G
L
I
S
H
30
31