3.2 HDMI OUTPUT
VIDEO SETUP
TV SYSTEM |
|
HDMI OUTPUT | HD OFF |
| 720P |
VIDEO | |
TV TYPE | 1080i |
| 1080P |
This function allows the user to select thescreen resolution for HDMI output. If no video outputs when a resolution is selected, press the HD button to adjust to the resolution that your TV supports.
Note:
•The player will not automatically adjust itself to the optimal resolution that matches your TV when the HD button is pressed. You can enter the setup menu to select .
•If your TV or monitor without HDCP, blue screen without picture appears when playing the DVD discs which are protected by copyrights.
•See your TV owner’s manual for more information on how to select the TV’s Video Input source.
3.3VIDEO
VIDEO SETUP
TV SYSTEM |
|
HDMI OUTPUT |
|
VIDEO | |
TV TYPE | |
|
Choose the type of video output that matches the video connection between the unit and the TV.
Note:
•You can only choose the video output in HD OFF mode.
•When one HDMI output option (720p,1080i or 1080p )is selected, the video menu is turn to gray, and the video output is forcibly turned to component output.
3.4TV TYPE
VIDEO SETUP
TV SYSTEM |
|
HDMI OUTPUT |
|
VIDEO |
|
TV TYPE | 4:3 PS |
| 4:3 LB |
| 16:9 |
4:3 PS Select this when the unit is connected to a normal TV. Wide- screen images are shown on the screen, but with some parts cut automatically.
4:3 LB Select this when the unit is connected to a normal TV. Wide- screen images are shown on screen, with black belts on the top and bottom
16:9 Select this when the unit is connected to a
Note:
•Some discs may not be able to be played according to your selection.
•Discs recorded in 4:3 mode will only be played in 4:3.
•The TV TYPE should correspond to the TV screen.
4.AUDIO SETUP
4.1DIGITAL OUTPUT
|
|
|
|
|
|
| AUDIO SETUP | ||
|
|
| ||
| DIGITAL OUTPUT | SPDIF/RAW | ||
| DYNAMIC RANGE | SPDIF/PCM | ||
|
|
|
|
|
If an A/V Receiver or amplifier is connected to the unit’s “COAXIAL” socket, the following settings can be selected.
SPDIF/RAW: Outputs the original audio format, AC3, DTS and PCM (for CD).
SPDIF/PCM: Outputs decoded PCM data.
Note:
•This unit cannot support DTS decode.
4.2 DYNAMIC RANGE
AUDIO SETUP
DIGITAL OUTPUT |
|
DYNAMIC RANGE | ON |
| OFF |
Reduces large variations in volume for
On: Loud sounds such as explosions are tuned down slightly.
Off: The unit plays back at the recording level on the disc.
PLAYING DVD/CD VCD DISC
| 1 |
| 7 |
8 |
|
6 | 2 |
| |
3 |
|
5 | 4 |
| 12 |
11
10
9
1.
(Open / Close)
•Press to open the disc tray.
Note:Load the disc on the disc tray with the disc label facing upward.
•Press again to close the disc tray. The unit will start playback
automatically.
2.
(Play)
•Press to start playback.
3.
(Pause / Frame-by-Frame Advance)
The image can be frozen and advance frame by frame.
•For CD, press 
to pause the playback. Press 
again or directly press 
to resume the normal playback.
•For DVD / VCD, press 
to pause the playback. Press 
again to go to STEP mode. Each press of the 
button will advance the frame in STEP mode.
Press 
to resume the normal playback.
4.
(Backward / Forward Search, Slow Motion)
•Press 
to search backward or forward. Press 
to resume the normal playback.
Each time the 
or 
button is pressed, the speed of backward / forward search changes at speed: x2, x4, x8, x20.
•In PAUSE mode, press 
to start forward slow motion play at
speed: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7. Press 
to resume normal playback.
Note:
Slow motion is not applicable to CD playback.
5.
(Skip Forward/Backward)
When a disc is playing, a chapter/track can be skipped backward/ forward.
•Press the 
button to skip to the beginning of the previous chapter or track.
•Press the 
button to skip to the beginning of the next chapter or track.
•For audio CD discs, use the numeric buttons (0 - 9 on the remote
control only) to directly jump to a track number.
6.
(Stop)
•Press 
once to stop the current playback instantly and enter the Resume Play mode.
Press 
again to resume playback from the point where the disc was stopped.
•Press 
twice to stop playback completely. It is now impossible to resume playback from the place where playback was stopped.
Press | again to start playback from the beginning of the disc. |
7.MENU
•Press to display the Disc Menu.
Notes:
This button has no function during playback of a CD.
For VCD, this function is only available at PBC ON mode.
8.TITLE
•Press to display the title menu if available on disc (DVD only).
9.ZOOM/CLEAR
Picture size can be magnified or reduced during playback.
•When a disc is playing, press the ZOOM/CLEAR button. Each time the ZOOM/CLEAR button is pressed, the ZOOM settings will be changed as follows :
ZOOM 2
•While an image is magnified, use the 
, 
, 
and 
keys to shift the image for viewing.
•To return to the original normal view, press the ZOOM/CLEAR key until the message ZOOM : OFF is shown. The screen will return to normal.
CLEAR: Press to delete the information you input in setup menus.
10.ANGLE/PBC
ANGLE (To change the Viewing Angle on a DVD disc)
Different viewing angles can be selected when playing a DVD video disc that contains scenes recorded from multiple angles.
•Press ANGLE/PBC repeatedly to select different viewing angles if available on the disc.
PBC (VCD/SVCD)
•When a VCD/SVCD is playing, press ANGLE/PBC repeatedly to switch between PBC ON and OFF.
•If PBC ON is selected, the disc menu (if available) will appear on
the TV. Use the numeric keys
Note:
This function is only available when scenes shot from multiple angles have been recorded on the DVD disc. If
is not available, 
OFF is displayed.
11.AUDIO (To select the Audio Languages available on the disc) During playback, different audio languages can be selected.
•When a disc is playing, press AUDIO to show the current audio language.
: | [ 1 |
| 2CH ] |
•Press repeatedly to select the desired audio language.
Note:
•For VCD, audio output (Mono L, Mono R) can be selected.
12.SUBTITLE (To select the Subtitle Languages available on the disc) During playback, you can change the subtitle language or disable the subtitle function.
•While a disc is playing, press SUBTITLE to show the current subtitle playback language.
:[ 3 ENGLISH ]
•Press repeatedly to select the desired subtitle language.
Notes:
•This function can only be used for discs on which different subtitle languages have been recorded.
•The number of languages recorded may be different depending on the disc.
ADVANCED PLAYBACK FUNCTION
1. DISPLAY BUTTON
While the disc is playing, press DISPLAY to display playback information available, depending on the disc.
For DVD:
•Press DISPLAY once to display the playback information and playing
time of current chapter as below:
|
| Disc format |
| Current chapter | ||||
|
|
| Title |
|
|
|
| Total chapter |
DVD | TT 7/36 CH 1/41 | 00:03:12 | |||||||||
|
|
|
|
|
|
|
|
| Chapter |
|
|
|
|
|
|
|
|
| Total title | Elapsed time | |||
|
|
|
|
|
|
| |||||
|
|
|
|
| Current title |
|
| ||||
•Press DISPLAY two times to further display more playback information as the following:
| Audio |
|
| Subtitle |
|
|
| ||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
1/2ENG |
| 5.1CH | OFF | ||||||||
|
|
|
|
|
|
|
|
| Angle |
|
|
|
|
|
|
|
|
|
|
|
| ||
•Press DISPLAY thrice to check the remaining time of the current chapter.
•Press DISPLAY four to check the playing time of the current title.
•Press DISPLAY five times to check the remaining time of the current title.
For CD:
|
| Disc format |
| Unmute |
| Repeat Mode | |||
|
|
|
|
| Track |
|
|
|
|
CD TRK | 2 /2 |
|
| 00:03:12 |
| Total track |
|
|
|
| Current track |
|
| Elapsed time |
For VCD: |
|
| Repeat Mode | |
Disc format | Unmute | |||
Track |
|
| ||
|
|
|
| |
VCD TRK | 2 /2 | PBC |
| 00:03:12 |
| Total track |
|
|
|
| Current track | PBC status | Elapsed time | |
|
| |||
•Press DISPLAY once to display the playback information and playing time of the current track.
•Press DISPLAY twice to check the remaining time of the current track.
•Press DISPLAY three times to check the playing time of the current disc.
•Press DISPLAY four times to check the remaining time of the current
disc.
1.1 TT (Title Info)
•Displays the Title Number being played and the Total Number of Titles recorded on the disc.
1.2 CH (Chapter Info)
•Displays the Chapter Number being played and the Total Number of Chapters recorded on the disc.
1.3 Elapsed time
•Displays the elapsed time from the beginning of the title/chapter/ disc/track being played.
1.4 Audio
•Displays the audio language and audio output mode currently selected.
1.5 Subtitle
•Displays the subtitle language currently selected.
1.6 Angle
•Displays the viewing angle currently selected.
When a disc without 
OFF is displayed.
1.7 TRK (Track Info)
•Displays the Track Number being played and the Total Number of Tracks recorded on the disc.
1.8 Unmute Icon
•When the sound is unmuted, the icon will be displayed.
1.9 Repeat Mode
•Displays current repeat mode.
Note: After checking the settings, press DISPLAY again to make the information disappear.
2. GOTO FUNCTION
This function allows you to select any point on the disc and to start playback from this point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Current Chapter | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Total Chapter | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DVD | TT | 07 | /36 CH 1/41 | 00:03:12 | |||||||||||||
|
|
|
|
|
|
|
|
|
|
| Total Title |
|
| |||||
|
|
|
|
|
|
|
| Current Title | Time | |||||||||
|
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
| Current Track |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||
| CD | TRK | 02 | /16 | 00:03:12 | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| Total track |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| Time | |||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
2.1Selecting a Specific Title/Chapter for DVD or Track for CD/VCD Any specific Title/Chapter/Track can be selected to start playback by directly selecting the Title/Chapter for the DVD or Track number for the CD/VCD.
•Press GOTO.
•Press 
or 
to highlight the Title / Chapter / Track field and press the corresponding numeric key 0 - 9.
•Press OK to confirm. The unit will then start playback from the selected position.
Note: Press CLEAR to reset the highlighted Title / Chapter / Track.
2.2 Locating a Specific Time
A specific time can be selected by directly entering the time (hours, minutes, seconds).
•Press GOTO.
•Press 
or 
to highlight the time.
•Using the numeric keys 0 - 9, directly key in the time when playback should start.
-The first two digits are for the hours.
-The next two digits are for the minutes.
-The last two digits are for the seconds.
•After entering the time, press OK to confirm. The unit will then start
playback from the selected time.
Notes:
•Some discs may not allow use of this function.
•Some scenes may not be located precisely as specified.
•This method for accessing a specific location is available only within the current title of the DVD disc or current track of the CD disc.
•For VCD, it works at PBC OFF mode only.
•Press ZOOM/CLEAR to reset the highlighted time.
3. PROGRAMMING PLAYBACK
•Press the PLAYMODE button.
| PLAY MODE |
|
|
| PLAY MODE |
|
|
|
| MODE | OFF |
|
| MODE | PROG |
|
|
| REPEAT | OFF |
| REPEAT | OFF |
| ||
|
|
|
|
|
| |||
• | When MODE is highlighted, use or | to select PROG mode. | ||||||
| Then press OK to confirm. |
|
|
|
| |||
Note:
During VCD/SVCD playback, the function is only available when PBC is OFF.
3.1 DVD Programming
PROGRAM
Chapter
Title
•Enter the title numbers in 
(2 digit format, e.g. 01). Use 
or 
to highlight chapter and enter the chapter numbers in 
.
•Use 
, 
, 
or 
to move to another entry.
•Repeat the above steps for more inputs.
•Press 
or highlight PLAY on the screen and press OK to start the programmed playback.
3.2 CD/VCD/SVCD Programming
•Enter the track numbers in 
.
•Refer to DVD Programming for program operation.
PROGRAM
3.3 Clear the Programs
•Highlight the current input on the screen and press CLEAR to
delete the program.
Note:
•Highlight CLEAR on the PROG screen and press OK to delete all programs.
4. Random Playback
•Press the PLAYMODE button.
PLAY MODE
MODERANDOM
REPEAT OFF
•When MODE is highlighted, use 
or 
to select RANDOM mode. Then press OK to confirm.
Note:
•For VCD, it works in PBC OFF mode only.
5. Repeat Playback
A specific title, chapter or track can be played repeatedly.
Note: During VCD / SVCD playback, repeat playback is only available when PBC is OFF.
5.1 Repeating a Title/Chapter/Track/All disc
PLAY MODE |
|
MODE | OFF |
REPEAT | REP ALL |
|
|
•Press the PLAYMODE button, then use 
or 
to select the REPEAT option.
•Use 
or 
button to select the repeat mode and press OK to confirm.
For DVD Disc : OFF > CHAPTER > TITLE
For CD / VCD / SVCD Disc : OFF > REP 1 > REP All
For MP3/JPEG/WMA files: OFF>REP DIR>REP1>REP ALL
5.2 Repeating a Specific Section
•While the disc is playing, press the
REPEAT A-
•Press
REPEAT A-B
•The unit will then immediately begin replaying the selection ( A to B) repeatedly.
•Press the
A-B CANCEL
Note:
•The
6. VCD/SVCD Playback control
•While a VCD / SVCD is playing, press ANGLE/PBC repeatedly to switch between PBC (Playback Control) ON and OFF.
PBC: | [ ON ] |
|
|
•If PBC ON is selected, the Disc Menu (if available) will appear on
the TV. Use 
or Numeric keys
PBC: | [ OFF ] |
|
|
•If PBC OFF is selected, the unit will skip the disc menu and start playback directly.
•Press MENU to return to the Disc Menu with PBC ON mode.
7.Bookmark
- - - - - - - - - - - | T 1 C 1 00 : 03 :21 |
The Bookmark feature allows a point to be marked for playback.
7.1 Creating a Bookmark
•During DVD / CD / VCD playback, press BOOKMARK to access the bookmark menu.
•Press OK to add the first bookmark, then use the 
/ 
buttons to move the cursor and press OK to add additional bookmarks.
7.2 Recalling a Bookmark
•During playback, press BOOKMARK to access the bookmark menu.
•Use 
or 
button to highlight the desired bookmark and press 
to play from the bookmark point. Press CLEAR to delete the
highlighted bookmark.
Note:
•For VCDs, this function works in PBC OFF mode only.
PLAYING MP3/JPEG/WMA/MPEG4 FILES
4 | 1 |
| |
2 |
|
6 |
|
3 |
|
8
7
5
1.
(Play)
•Press to start playback.
2.
(Pause)
•Press to pause the playback.
•Press 
again or 
to resume normal playback.
3.
(Skip)
•Press to skip a track or picture forwards or backwards.
4.
(Stop)
•Press to stop playback and display the Selection Menu (For JPEG and movie files).
Note: Press 
to play from the beginning.
5.ZOOM/CLEAR
ZOOM
•Press to zoom into the picture during a JPEG file slideshow or MPEG playback.
CLEAR
•Press to delete the information you inputted.
6.Active Navigation
•Press to rotate the pictures when playing the pictures.
•Press to select a file and then press OK to confirm in the selection menu.
•Moves the picture frame in ZOOM status.
7.Audio ( MPEG 4)
•During playback, press AUDIO to show the current playback audio language.
•Press repeatedly to select the desired audio language.
8.Subtitle ( MPEG 4)
•The unit only can support the MPEG4 files with external subtitle.
•To use the subtitle function:
1)Download or create the subtitle file with specified format, e.g. Subrip (*.srt), MicroDVD (*.sub), SAMI Captioning (*.smi), SubViewer 2.0 (*.sub).
2)Name the MPEG 4 movie and subtitle file with the same characters (e.g. abc.avi & abc.srt). Burn them on to a CD disc or copy them into the USB device.
3)Insert the disc or USB device and select the MPEG4 file to play, then press SUBTITLE to turn subtitle on or off.
SELECTION MENU
The Selection Menu will appear when MP3/ WMA/JPEG/MPEG 4 files are read.
All folders will appear on the left side menu and numbered in ascending order. When one of the folders is highlighted, all the contents of the folder will be displayed on the right side.
Music/Picture/Movie files can be selected individually for desired playback. Use the navigation keys to highlight the Music/Picture/Movie icon at the bottom of Selection Menu and press OK to confirm.
Then select the files and press OK or 
to start playback.
01 . BITRATE | 01 . BITRATE_03 |
02 . FOLDER TEST | 02 . BITRATE_04 |
03 . FOLDER 1 | 03 . BITRATE_05 |
| |
04 . ADD CHARAK | 04 . BITRATE_06 |
| 05 . BITRATE_07 |
| 06 . BITRATE_08 |
| 07 . BITRATE_09 |
| 08 . BITRATE_10 |
| 09 . BITRATE_11 |
MusicPicture
[MUSIC] --- MP3 / WMA Files
The unit will play the MP3 / WMA file currently selected. It will then play all the files in the subfolders contained within its folder. After that, the unit will play the remaining folders on the disc.
[PICTURE] --- JPEG Files
Press PLAY 
, the unit will start the slideshow from the JPEG file currently selected. Then you can zoom or rotate the displayed pictures. You can also select a folder and display all the files in that folder. Select the folder of your
choice and press the 
button.
[MOVIE] --- MPEG 4 Files
The unit will start to play the whole file currently selected.
Notes:
•MP3 and JPEG files can be played simultaneously.
•The highlighted icon at the bottom of the menu indicates what kind of file is playing.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment to a supply outlet different from that to which the
receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
CD RIPPING
With this player, you can record your favorite CD music to a USB disk with MP3 format.
1.Check that the USB disk has been properly connected.
2.Insert a CD disc that contains the music you want to record into the disc tray.
3.Press the SOURCE key on the remote control to select the DISC mode to play.
4.Press RIPPING, the CD RIPPING menu then displays on the screen.
• | In the OPTIONS menu, use , , or to move to the encoder |
| options and then press OK to change the settings. |
| SPEED: Set the encoding speed between 1X and 4X. |
| BITRATE: Set the encoding bit rate among 128KBPS, 160KBPS, |
| 192KBPS, 256KBPS and 320KBPS. |
•In the TRACKS menu, the default is to record all the tracks that
have a “cross” mark in the box next to them. You can use or
to select the track that you do not want to record and then press OK to confirm deletion.
•In the START menu, you can check the total tracks, total time and total size that you want to record.
Press OK to start playing and recording the selected tracks.
•Highlight QUIT and press OK to exit the CD RIPPING menu.
•The tracks are saved in the folder named “RIPPING”.
Notes:
• This unit can not support NTFS format. If the USB disk doesn’t work on it, please check the USB disk file system and format it with FAT or FAT32.
• If “USB ERROR” appears during CD Ripping, or the MP3 files cannot be read after ripping, please format the USB disk with FAT
or FAT32 and then start the ripping again.
TROUBLESHOOTING GUIDE
If it appears that the unit is faulty, first consult this checklist. It may be that something simple has been overlooked.
Note: Under no circumstances should you try to repair the unit yourself as this will void the warranty. Only qualified service personnel can remove the cover or service this unit.
NO POWER
•Check that the player is switched on.
•Check if the power cord is properly connected.
NO PICTURE
•Check if the TV is switched on.
•Check if the correct AV input is selected on the TV (refer to the TV manual for more details).
•Check the video connection between the player and TV.
NO PICTURE AT HDMI OUTPUT.
•Check if the TV HDMI input is selected.
•Check if the HDMI resolution selected corresponds to the resolution of your HD TV.
•Check if your HD TV supports HDCP.
BAD QUALITY PICTURE
•Check the disc for fingerprints and clean with a soft cloth, wiping from the center to the edge.
•A small amount of picture distortion may sometimes appear, this is not a malfunction.
•Check if the disc format is compatible with the TV (PAL/NTSC).
NO COLOR IN PICTURE
•Check if the disc format is compatible with the TV (PAL/NTSC).
•Check that the DVD player is not connected through a VCR.
PICTURE INTERFERENCE
•Relocate the unit further away from possible interference or emission sources (e.g. radio, power amplifier, radiator etc.).
NOT RETURNING TO START-UP SCREEN WHEN
DISC IS REMOVED
•Check to see if the program requires another disc to be loaded.
•Reset by unplugging the player from the power, then connect the power again.
THE PLAYER DOES NOT RESPOND TO THE
REMOTE CONTROL
•Aim the remote control directly at the sensor on the front of the player.
•Avoid all obstacles which may interfere with the transmission path.
•Inspect and/or replace the batteries.
NO SOUND
•Check audio connections.
•If using a
•Clean the disc.
•Check if the disc is defective by trying another disc.
NO AUDIO AT DIGITAL OUTPUT
•Check the digital connections.
•Check the Digital Out menu to make sure that the digital output is correctly set.
•Check if the audio format selected is compatible with the player.
NO AUDIO AT HDMI OUTPUT
•Check if the DTS digital out is selected as audio output if DTS is
played.
DISC CANNOT BE PLAYED
•Ensure disc is placed properly into the disc tray.
RESTORE THE FACTORY DEFAULT SETTINGS
•Under DVD mode with NO DISC in the unit, press “76000” on Remote Control to reset the DVD player to the default settings.
The DVD player will switch to standby mode automatically.
IMPROPER FUNCTIONING
•The normal function of the product may be disturbed by external interference. Just reset the product by disconnecting and reconnecting the power cord.