Pentair VS-3050 Setting the pump preset speed, Adjusting the pump speed

Page 11

5

Section 2

Operating IntelliFlo VS-3050

This section describes how to use the IntelliFlo VS-3050 pump control panel.

Setting the pump preset speed

IntelliFlo operates using one of the preset speeds. Use the speed buttons to select the preset speeds.

To set the pump speed

1.Ensure that the pump is powered on and the green power LED is on.

2.Press the desired speed button (1- 4) for less than three seconds to select the preset pump speed. When the selected speed button is pressed, the LED is on. The pump preset buttons and speeds are:

Speed 1 button - 750 RPM

Speed 2 button - 1500 RPM

Speed 3 button - 2350 RPM

Speed 4 button - 3110 RPM

3. Press the Start button to start the pump using the selected speed if necessary.

Adjusting the pump speed

IntelliFlo can be adjusted to run at any speed between 400 RPM and 3450 RPM.

To adjust the pump speed

1.Ensure that the pump is powered on and the green power LED is on.

2.Press the Start button to start the pump if the pump is not running.

3.Press the UP/Down button to increase or decrease the pump speed.

10 RPM increments: Press and quickly release the Up/Down button to increase or decrease the speed in 10 RPM increments.

20 RPM increments: Press and hold the Up/Down button to continuously increase or decrease the pump speed.

4.

Saving an adjusted speed: To save the newly adjusted pump speed, press and

 

 

hold the desired speed buttons to assign the current speed. Four new pump

 

 

speeds can be assigned to Speed buttons (1-4).

Up/Down button

5.

Press the Speed button that is assigned to the adjusted speed.

 

IntelliFlo VS-3050 Installation and User’s Guide

Image 11
Contents IntelliFlo VS-3050 Phone 800 Fax 800 Protected by U.S. Patents Pending Technical SupportContents Important Notice Important Safety PrecautionsImportant Safety Precautions General Warnings General Installation InformationExternal Control IntelliFlo VS-3050 Variable Speed PumpIntelliFlo VS-3050 models Features IntelliFlo VS-3050 Motor AssemblyIntelliFlo VS-3050 Drive Assembly and Control Panel Controls and LEDs IntelliFlo VS-3050 Operator Control PanelAdjusting the pump speed Setting the pump preset speedStopping the pump Resetting the pump to factory defaultsAssigning a pump address for remote control Starting the pumpVolute Priming the pump for the first time, or after serviceClamp External Control External Control with IntelliComm Communication CenterConnecting IntelliFlo VS-3050 to an EasyTouch System EasyTouch to IntelliFlo pin configuration Control panel Connecting IntelliFlo VS-3050 to an IntelliTouch System IntelliTouch Personality board COM Port J7/J8 SunTouch Motherboard Connecting IntelliFlo VS-3050 to a SunTouch SystemBlank Pump Strainer Basket Pump Strainer Basket ServiceClamp Lid Volute Motor ServiceWinterizing Priming the pump after serviceBlank Piping IntelliFlo VS-3050 Kit ContentsInstalling the IntelliFlo LocationWiring the IntelliFlo VS-3050 Pump Disassembly Shaft Seal Replacement Pump DisassemblyPump Reassembly/Seal Replacement Drive Assembly Removal and Installation Replacement Parts Illustrated Parts ListIntelliflo VS-3050 Flow and Power vs Flow Pump Curve IntelliFlo VS-3050 Electrical SpecificationsIntelliFlo VS-3050 Pump Dimensions Blank Alarm and warning LED sequence TroubleshootingProblem Possible Cause Corrective Action General IntelliFlo VS-3050 Troubleshooting ProblemsProblems and Corrective Action IntelliFlo VS-3050 Installation and User’s Guide Page 357269
Related manuals
Manual 16 pages 47.23 Kb

VS-3050 specifications

The Pentair VS-3050 is a highly efficient variable speed pool pump designed for residential swimming pools. With its advanced technology and user-friendly features, it provides an innovative solution for pool owners looking to optimize energy use and maintain crystal-clear water. Its capabilities not only reduce operational costs but also enhance the overall pool experience.

One of the standout features of the VS-3050 is its variable speed motor, which allows users to adjust the pump's speed according to their specific needs. This flexibility enables significant energy savings as the pump operates efficiently at lower speeds for routine tasks such as filtration, while higher speeds can be utilized for heavy-duty tasks like vacuuming or water feature operation. Compared to traditional single-speed pumps, the VS-3050 can reduce energy consumption by up to 90%, leading to lower electricity bills and a smaller carbon footprint.

The VS-3050 also boasts a user-friendly digital control interface, making it easy for pool owners to set schedules and adjust speed settings. The intuitive display guides users through programming, allowing them to create customized operation schedules that align with their habits and pool maintenance needs. Additionally, its ability to integrate with automation systems means users can control pump settings remotely, further enhancing convenience.

Durability is another key characteristic of the Pentair VS-3050. Built with robust materials, the pump is designed to withstand the rigors of outdoor conditions while providing reliable performance year after year. The pump features a quiet operation mode, making it a welcome addition to any backyard setting without disturbing the tranquility of outdoor relaxation.

Moreover, the VS-3050 is designed for ease of installation and maintenance. With a compact footprint and lightweight construction, it can easily fit into most existing setups without requiring extensive modifications. Maintenance tasks are simplified, encouraging pool owners to keep their systems running smoothly.

In summary, the Pentair VS-3050 is an exemplary variable speed pool pump that combines advanced technology, efficiency, and user convenience. Its energy-saving capabilities, easy-to-use control interface, durable construction, and low maintenance make it a top choice for pool owners seeking to enhance their pool experience. Embracing the VS-3050 means investing in a sustainable future for backyard leisure while ensuring the water remains clean, clear, and inviting.