Pentair important safety instructions General IntelliFlo VS-3050 Troubleshooting Problems

Page 36

30

General IntelliFlo VS-3050 Troubleshooting Problems

Use the following general troubleshooting information to resolve possible problems with your IntelliFlo pump. Note: Switch the main power off to the pump before attempting service or repair.

Problem

Possible Cause

Corrective Action

 

 

 

Pump failure. Refer to

Pump will not prime - Air leak in suction.

Check suction piping and valve

Alarm and warning LED

 

glands on any suction gate

sequence on page 29.

 

valves.

 

 

Secure lid on pump strainer pot

 

 

and make sure lid gasket is in

 

 

place.

 

 

Check water level to make sure

 

 

skimmer is not drawing air.

 

Pump will not prime - Not enough water.

Ensure that the suction lines,

 

 

pump, strainer, and pump volute

 

 

are full of water.

 

Pump strainer clogged.

Clean pump strainer pot.

 

Pump strainer gasket defective.

Replace gasket.

 

 

Reduced capacity and / Air pocket or leaks in suction line.

Check suction piping and valve

or head.

 

glands on any suctin gate valves.

Refer to Alarm and

 

 

warning LED sequence

Clogged impeller.

Turn off electrical power to the

on page 29.

 

pump.

 

 

Remove the (6) bolts that holds

 

 

the volute to the seal plate.

 

 

Slide the motor and seal plate

 

 

away from the volute.

 

 

Clean debris from impeller. If

 

 

debris cannot be removed,

 

 

complete the following steps.

 

 

1. Remove diffuser and o-ring.

 

 

2. Remove left hand thread anti-

 

 

spin bolt and o-ring.

 

 

3. Remove, clean and reinstall

 

 

impeller.

 

 

4. Reinstall anti-spin bolt and

 

 

o-ring.

 

 

Reinstall diffuser, and o-ring.

 

 

Reinstall motor and seal plate

 

 

into volute.

 

 

Reinstall (6) bolts around seal

 

 

plate and volute and tighten

 

 

securely.

Pump strainer clogged.

Clean suction trap.

IntelliFlo VS-3050 Installation and User’s Guide

Image 36
Contents IntelliFlo VS-3050 Technical Support Phone 800 Fax 800 Protected by U.S. Patents PendingContents Important Safety Precautions Important NoticeImportant Safety Precautions General Installation Information General WarningsIntelliFlo VS-3050 Variable Speed Pump IntelliFlo VS-3050 modelsExternal Control IntelliFlo VS-3050 Motor Assembly FeaturesIntelliFlo VS-3050 Drive Assembly and Control Panel IntelliFlo VS-3050 Operator Control Panel Controls and LEDsSetting the pump preset speed Adjusting the pump speedResetting the pump to factory defaults Assigning a pump address for remote controlStarting the pump Stopping the pumpPriming the pump for the first time, or after service VoluteClamp External Control with IntelliComm Communication Center External ControlConnecting IntelliFlo VS-3050 to an EasyTouch System EasyTouch to IntelliFlo pin configuration Control panel Connecting IntelliFlo VS-3050 to an IntelliTouch System IntelliTouch Personality board COM Port J7/J8 Connecting IntelliFlo VS-3050 to a SunTouch System SunTouch MotherboardBlank Pump Strainer Basket Service Pump Strainer BasketMotor Service Clamp Lid VolutePriming the pump after service WinterizingBlank IntelliFlo VS-3050 Kit Contents Installing the IntelliFloLocation PipingWiring the IntelliFlo VS-3050 Pump Disassembly Pump Disassembly Pump Reassembly/Seal ReplacementShaft Seal Replacement Drive Assembly Removal and Installation Illustrated Parts List Replacement PartsIntelliFlo VS-3050 Electrical Specifications IntelliFlo VS-3050 Pump DimensionsIntelliflo VS-3050 Flow and Power vs Flow Pump Curve Blank Troubleshooting Alarm and warning LED sequenceGeneral IntelliFlo VS-3050 Troubleshooting Problems Problem Possible Cause Corrective ActionProblems and Corrective Action IntelliFlo VS-3050 Installation and User’s Guide Page 357269
Related manuals
Manual 16 pages 47.23 Kb

VS-3050 specifications

The Pentair VS-3050 is a highly efficient variable speed pool pump designed for residential swimming pools. With its advanced technology and user-friendly features, it provides an innovative solution for pool owners looking to optimize energy use and maintain crystal-clear water. Its capabilities not only reduce operational costs but also enhance the overall pool experience.

One of the standout features of the VS-3050 is its variable speed motor, which allows users to adjust the pump's speed according to their specific needs. This flexibility enables significant energy savings as the pump operates efficiently at lower speeds for routine tasks such as filtration, while higher speeds can be utilized for heavy-duty tasks like vacuuming or water feature operation. Compared to traditional single-speed pumps, the VS-3050 can reduce energy consumption by up to 90%, leading to lower electricity bills and a smaller carbon footprint.

The VS-3050 also boasts a user-friendly digital control interface, making it easy for pool owners to set schedules and adjust speed settings. The intuitive display guides users through programming, allowing them to create customized operation schedules that align with their habits and pool maintenance needs. Additionally, its ability to integrate with automation systems means users can control pump settings remotely, further enhancing convenience.

Durability is another key characteristic of the Pentair VS-3050. Built with robust materials, the pump is designed to withstand the rigors of outdoor conditions while providing reliable performance year after year. The pump features a quiet operation mode, making it a welcome addition to any backyard setting without disturbing the tranquility of outdoor relaxation.

Moreover, the VS-3050 is designed for ease of installation and maintenance. With a compact footprint and lightweight construction, it can easily fit into most existing setups without requiring extensive modifications. Maintenance tasks are simplified, encouraging pool owners to keep their systems running smoothly.

In summary, the Pentair VS-3050 is an exemplary variable speed pool pump that combines advanced technology, efficiency, and user convenience. Its energy-saving capabilities, easy-to-use control interface, durable construction, and low maintenance make it a top choice for pool owners seeking to enhance their pool experience. Embracing the VS-3050 means investing in a sustainable future for backyard leisure while ensuring the water remains clean, clear, and inviting.