Panasonic SC-EN37 manual Radio operations

Discs operations (continued) ➡ Page 2 for the position of remote control buttons.

		Play Mode function
Press [PLAY MODE] to select the desired mode.
	Mode		To play
	1-TRACK		one selected track on the disc.
	1TR		Press the numbered buttons to select the track.
	1-ALBUM MP3		one selected album on the disc.
	1ALBUM		Press [ALBUM	or	] to select the album.
	RANDOM		a disc randomly.
	RND
	1-ALBUM RANDOM	MP3	all tracks in one selected album randomly.
	1ALBUM RND		Press [ALBUM	or	] to select the album.

Note

• During random play, you cannot skip to previous track.

Repeat play

You can repeat program play or other selected play mode.

Press [REPEAT] before or during play. “REPEAT ON” and “ & ” are displayed.

To cancel

Press [REPEAT] again.

“REPEAT OFF” is displayed and “ & ” is cleared.

Display function

This function allows you to display the information of the current track.

Press [DISPLAY] repeatedly during play or pause.

CD Elapsed play time Remaining play time

MP3

Elapsed time Album name Track name

ID3 (Artist) ID3 (Track) ID3 (Album)

Note

•Maximum number of displayable characters: approximately 30

•This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed.

•ID3 is a tag embedded in MP3 tracks to provide information about the track.

Note on CD-R and CD-RW

This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an audio recording disc for CD-DA and finalize* it when you finish recording.

The unit may not be able to play some discs due to the condition of the recording.

A process performed after recording that enables CD-R/CD-RW players to play audio CD-R and CD-RW.

Caution

Choose discs with this mark:

Do not: • use irregularly shaped CDs.

•attach extra labels and stickers.

•use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers.

•attach scratch-proof covers or any other kind of accessory.

•write anything on the CD.

•clean CDs with liquids (Wipe with a soft, dry cloth.).

Note about using a DualDiscs

•The digital audio content side of a DualDiscs does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format, so play may not be possible.

•Do not use a DualDiscs in this unit as it may not be possible to insert it correctly and it may get scratched or scraped.

MP3

The unit can play MP3, a method of compressing audio without overly hurting audio quality.

When creating MP3 files to play on this unit

•Maximum number of tracks and albums: 999 tracks and 256 albums.

•Compatible compression rate: Between 64 kbps and 320 kbps (stereo). 128 kbps (stereo) is recommended.

•Disc formats: ISO9660 level 1 and level 2 (except for extended formats).

•The time for reading TOC depends on the number of the tracks, the folders or folder structures.

Limitations on MP3

•This unit is compatible with multi-session but if there are a lot of sessions it takes more time for play to start. Keep the number of sessions to a minimum to avoid this.

•This unit cannot play files recorded using packet write.

•If the disc includes both MP3 and normal audio data (CD-DA), the unit plays the type recorded in the inner part of the disc.

If the disc includes both MP3 and other types of audio data (e.g. WMA or WAV), the unit plays only the MP3.

•Depending on how you create MP3 files, they may not play in the order you numbered them or may not play at all.

Radio operations

Allocation settings

Each country allocates broadcast bands according to their particular system. You can change the FM steps. The step is factory-set to 0.2 MHz, but you can change it to receive broadcasts allocated 0.1 MHz steps.

Any FM/AM frequencies preset in channels will be changed by this procedure. Preset them again.

 Select the FM band with [FM/AM/MUSIC P.] on the unit.

Press and hold [FM/AM/MUSIC P.] on the unit.

After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed.

To return to the original step, repeat the above steps.

Note

The preset memory will be initialized when you change your frequency step.

To improve reception

Manual tuning

Press [FM/AM] to select “FM” or “AM”.

 Press [PLAY MODE] to select “MANUAL”.

 Press [2/u] or [1/i] to select the frequency of the required station.

To tune automatically

Press [FM/AM] to select “FM” or “AM”.

 Press [PLAY MODE] to select “MANUAL”.

 Press and hold [2/u] or [1/i] until the frequency starts changing rapidly.

• Auto tuning stops when it finds a station.

• To cancel auto tuning, press [2/u] or [1/i] once again.

Note

• Auto tuning may not function when there is excessive interference.

Memory preset

You can preset up to 20 FM channels and up to 12 AM channels. Preparation: Press [FM/AM] to select “FM” or “AM”.

FM

Receive the radio stations after connecting the antenna. Then attach the antenna cord to a wall or pillar where there is good reception.

AM

Change the direction and location of the antenna.

Automatic presetting

Press and hold [PGM, -AUTO PRESET] to start presetting.

Manual presetting

Press [PLAY MODE] to select “MANUAL”.

Press [2/u] or [1/i] to tune to the required station.  Press [PGM, -AUTO PRESET].

 Press the numbered buttons to select a channel.

The station occupying a channel is erased if another station is preset in that channel.

 Repeat steps 2 to 4 to preset more stations.

	To improve FM sound quality
	Press and hold [PLAY MODE] to display “MONO”.
	To cancel
4	Press and hold [PLAY MODE] again until “MONO” disappears.
	• MONO is also canceled if the frequency is changed.
	• Turn off “MONO” for normal listening.

Selecting a preset station

Press the numbered buttons to select the channel. For channels 10 to 20 press [ ≧10], then the two digits.

OR

Press [PLAY MODE] to select “PRESET”.

Press [2/u] or [1/i] to select the channel.