1.16 Caller ID Features
<Modification Flowchart>
An outside (CO) line call containing
Caller ID information is received.
Yes | Is the caller's area code stored in | No |
| the Caller ID Modification Table? |
|
Modifies the number according to the method programmed in the corresponding "Local Call" field.
Example:
Removed number of digits: 3
Added number: blank
Example:
Received number: 201 555 1234
Modified number: | 555 1234 |
Modification is complete.
Modified number is logged.
Modifies the number according to the method programmed in the
Example:
Removed number of digits: 0
Added number: 1
Example:
Received number: 313 555 1234
Modified number: 1 313 555 1234
Modification is complete.
Modified number is logged.
4.Displaying the Caller's Name
When a call containing Caller ID information is received, the PBX will search for the caller's name in the following order, then show that name on the display.
1)The System Speed Dialling Table
2)The Caller ID information received from the telephone company
If a caller's name is not stored in the PBX or sent from the telephone company, it will not be displayed.
Conditions
[General]
•Hardware Requirement: An optional Caller ID card.
[Caller ID Display on SLT]
•Caller ID Display on SLT feature applies to: Intercom calls and outside (CO) line calls.
Intercom calls include forwarded calls, calls from Transfer Recall and Hold Recall.
Outside (CO) line calls include calls directed to Uniform Call Distribution (UCD) or Direct Inward System
122 Feature Guide
