![Redialling after Pulse to Tone Conversion [119]](/images/new-backgrounds/61978/61978415x1.webp)
3.3 PT Programming
Redialling after Pulse to Tone Conversion [119]
1 1 9 | NEXT | SELECT STORE | END |
(Enable/Disable)
Feature & Programming References
1.5.2.4 Dial Type Selection
Bell Frequency [120]
1 2 0 | NEXT | SELECT STORE | END |
(20/25 Hz)
Note
This programme selects the bell frequency sent to an SLT.
Automatic Line Access [121]
1 2 1 | NEXT | SELECT STORE | END |
(Dial 0/9)*
Note
* For New Zealand: 1 or 9
Feature & Programming References
1.5.3.3Outside (CO) Line Access 2.2.4 Operator/Manager Features
Automatic Rotation for CO Line Access [122]
1 2 2 | NEXT | SELECT STORE | END |
(Enable/Disable)
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
Break Ratio [123]
1 2 3 | NEXT | SELECT STORE | END |
(MODE1: 66 %/ MODE2: 60 %)
Note
This programme selects the pulse break ratio (the ratio between the length of the pulse and the length of the pause) when a pulse is sent to the telephone company while dialling a telephone number.
208
Feature Guide