Panasonic kx-tea308 Caller ID Features, Description, Caller ID Display on SLT, Notes, Details in

1.16 Caller ID Features

1.16 Caller ID Features

1.16.1 Caller ID

Description

The PBX can receive Caller ID information (telephone numbers and callers' names) from calls received on outside (CO) lines. This information can be shown on the displays of proprietary telephones (PTs) as well as some single line telephones (SLTs) when receiving calls. Additionally, Caller ID information is logged in the Incoming Call Log of the extension that received the call, allowing the caller to view a record of incoming calls or make a call to a person in the call log later.

The PBX can be programmed to modify a caller's telephone number when it is received by, for example, adding an Outside (CO) Line Access number or adding/deleting certain digits of incoming telephone numbers automatically. This allows an extension user to make a call later to a telephone number logged in his or her call log without worrying about Outside (CO) Line Access numbers, area codes, etc.

Notes

•The term "Caller ID" used in this Feature Guide refers to features that can receive caller information sent from the telephone company and received on outside (CO) lines. Your network provider may use a different name for this type of service.

•To receive Caller ID information, you must subscribe to the telephone company's Caller ID service and enable Caller ID for the appropriate outside (CO) lines through system programming ( Caller ID [900]).

•Caller ID signalling type, FSK (Bell 202 or V.23) or DTMF, can be selected to match the type used by your telephone company through system programming ( Caller ID Type [910]).

Caller ID Display on SLT

This feature is available only for SLTs compatible with either FSK-type Caller ID or DTMF (Dual Tone Multi- Frequency)-type Caller ID.

Notes

•This feature complies with ETSI (European Telecommunications Standards Institute)-type FSK and Bellcore-type FSK.

•This feature does not comply with methods using DT-AS signal or line reversal signal.

1.Caller ID-Related Feature

Feature	Description	Details in
Incoming Call Log	Caller ID information is automatically recorded in	• 1.16.2 Incoming
	the call log of the extension that received the call.	Call Log
	This information can be used to view a record of
	incoming calls or make calls to any number in the
	call log.

2.Caller ID Automatic 0 Addition

When a call containing Caller ID information is received, the PBX can add "0"*1 to the caller's telephone number as a leading number if it does not begin with "0", through system programming ( Caller ID Automatic 0 Addition [905]).

*1 For New Zealand, "0" can be added to the received telephone number when the maximum length of a telephone number is 8 or 9 digits, and "00" can be added to the received telephone number when the maximum length is 10 digits or more.

120

Feature Guide