3.3 PT Programming
VM 1 APT Port [130]
1 3 0 | NEXT | SELECT STORE | END |
(Port03/Port03 & 04/ Disable)
Notes
•To change the current setting (other than "Disable"), select "Disable", then select the desired setting.
•This programme is not available when "Enable" is selected in DTMF Integration [103].
Feature & Programming References
1.19.1 Voice Mail APT Integration
SLT Ring/Silence Ratio [142]
1 4 2 | NEXT | SELECT STORE | END |
(1:2/1:3/1:4)
[On:Off]
Note
This programme selects the ratio between the bell signals of an SLT (a set of
Feature & Programming References
1.1.3.3Ring Tone Pattern Selection SLT Ring
SLT Ring Bell-on Time [143]
1 4 3 | NEXT | SELECT STORE | END |
(1000…2000 ms)
[100 ms increments]
Notes
•This programme selects the length of the
•This programme also determines the maximum number of digits of an SLT Caller ID number, when "DTMF1" or "DTMF2" is selected in SLT Caller ID Signalling Type [150].
Feature & Programming References
1.1.3.3Ring Tone Pattern Selection 1.16.1 Caller ID
210
Feature Guide