1.16 Caller ID Features
Access (DISA) ring groups, forwarded calls, intercepted calls, or calls from extensions that placed outside (CO) line calls on consultation hold.
•SLT Caller ID signalling type can be selected through system programming ( SLT Caller ID Signalling Type [150]).
•Each SLT (including an SLT connected in parallel with a PT) can be programmed to receive Caller ID information through system programming ( SLT Caller ID [628]).
•When the caller's telephone number is sent to an SLT, an Outside (CO) Line Access number can be automatically added to the telephone number through system programming ( SLT Caller ID Line Access Number [151]), to be used when calling the caller back.
•If a call is transferred, forwarded, or intercepted via Intercept Routing to an SLT, the original caller's information will be shown on the SLT.
•During a conversation, Caller ID information will not be shown on the SLT.
•When
•When
•Depending on the type of SLT being used, caller names and the dates and times that calls were received may not be able to be shown on the SLT.
•If an outside caller disconnects a call to an SLT on which the call's Caller ID information is displayed, and the SLT receives another outside (CO) line call directly after, the SLT will wait until a preprogrammed time has passed ( SLT Ring Wait Time for New Call [627]) before it starts to ring, and the new caller's Caller ID information will be shown on the SLT. A certain amount of time may be required between calls for an SLT to receive Caller ID information correctly.
•To enable the Caller ID feature, it may be necessary to set the same ring tone pattern ( SLT Fixed Bell Pattern [629]) as used by the telephone company.
•When an SLT is programmed to receive Caller ID information, the ringing of calls with Caller ID on that SLT is delayed for a few seconds. Therefore, the length of time before calls are forwarded or intercepted, and the length of time that intercepted calls ring at the destination SLT, may be slightly shorter than the duration specified through system programming.
Installation Manual References
2.3.2 3-Port Caller ID Card (KX-TE82493)
Feature Guide References
1.6.1.5 Speed
1.20.1Station Message Detail Recording (SMDR)
4.2.1Tones/Ring Tones
Feature Guide 123