2.3 System Data Control
2.3.2PT Programming
Description
A proprietary telephone (PT) can be used to customise the settings of the PBX or of an extension, using the following programming features:
Programming Type | Description | Example | Authorised |
| Programmer | ||
|
|
| |
|
|
|
|
Personal | Used by an extension user to | Extension user | |
Programming | customise the extension's | Line Preference— |
|
| settings. | Outgoing, etc. |
|
|
|
|
|
System Programming | Used by an authorised party to | System Password, | Authorised |
| customise the PBX. | Extension Number, etc. | administrator |
|
|
|
|
Manager | Used by the manager to | System Speed Dialling | Manager |
Programming | customise 4 system | Number, Extension |
|
| programming settings of the | Password Set, Call Log |
|
| PBX, set a password to each | Printout for Each |
|
| extension, and print out call log | Extension, etc. |
|
| information for each extension. |
|
|
|
|
|
|
Conditions
•The manager extension is the extension that is connected to the
•Only one system programming (including PC programming) or manager programming session is permitted at a time. These 2 programming features cannot be performed simultaneously by 2 users.
•During programming, the PT is considered to be busy and will not receive calls.
•System Password
To access system programming, the administrator system password must be entered. The system password is set at the factory but can be changed through system programming ( System Password [002]). The administrator can programme all system programming.
•Manager Password
To set the manager password, it is necessary to use the system password to perform Extension Password Set. Once set, the manager password can be used to access manager programming. The manager can assign a password to each extension (extension password).
•Personal Programming Data Reset
A PT user can simultaneously reset all settings made through personal programming (Line
•System Programming Data Reset
The PBX can return all or specific settings made through system programming to their default settings based on the following parameters ( System Data Clear [999]):
a)All para: All data
b)System para: All data except for "CO para", "Extn. para", and "DSS para"
c)CO para: The data assigned for each outside (CO) line
d)Extn. para: The data assigned for each extension
Feature Guide 175