Panasonic kx-tea308 manual Feature Highlights, levelAutomated Attendant AA, PC Programming

Models: kx-tea308

1 278
Download 278 pages 30.5 Kb
Page 5
Image 5
Feature Highlights

Feature Highlights

Built-in Voice Message (BV) (Optional voice message card required)

Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message area or the PBX's common message area (3-level Automated Attendant (AA) 1.15.7 Built-in Voice Message (BV)).

Fixed Line SMS Terminal Support (Optional Caller ID card required)

The PBX can relay incoming calls from a Short Message Service (SMS) centre to specific single line telephones (SLTs) that support SMS. Fixed Line SMS is a service that allows text messages to be sent and received via Public Switched Telephone Network (PSTN) access. We recommend using SMS-enabled Panasonic SLTs (PC Programming 1.17.3 Fixed Line SMS Terminal Support).

Caller ID Display on SLT (Optional Caller ID card required)

The PBX can receive Caller ID information (telephone numbers and callers' names) from calls received on outside (CO) lines. This information can be shown on the displays of SLTs that support Caller ID as well as proprietary telephones (PTs) when receiving calls (Automatic Configuration for Outside (CO) Line Type 1.16.1 Caller ID).

3-level Automated Attendant (AA)

3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward System Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages (OGMs), and be connected to the desired party automatically (Advanced Hybrid System 1.15.6 Direct Inward System Access (DISA)).

PC Programming

System programming settings can be accessed using a PC and the Panasonic KX-TEA308 Maintenance Console software as well as by using a PT (Manual background 2.3.1 PC Programming).

The PBX software can be upgraded via the Serial Interface (RS-232C port) or USB port, using the KX- TEA308 Maintenance Console software (Manual background 2.3.7 Firmware Upgrade).

Automatic Configuration for Outside (CO) Line Type

The dialling mode of connected outside (CO) lines is automatically configured the first time the PBX is accessed with a PC using the KX-TEA308 Maintenance Console software, or after the PBX data has been cleared (Manual background 2.3.5 Automatic Configuration for Outside (CO) Line Type).

Advanced Hybrid System

This PBX supports the connection of PTs*1, Direct Station Selection (DSS) Consoles, and single line devices such as SLTs, fax machines, wireless telephones, and data terminals.

*1 In this manual, "proprietary telephone" ("PT") means an analogue proprietary telephone (APT).

Feature Guide

5

Page 5
Image 5
Panasonic kx-tea308 manual Feature Highlights, levelAutomated Attendant AA, PC Programming, Advanced Hybrid System