GE SS1000, SS1800, SS500 manual Motor Installation XB and XC Motor Adapter Pumps

Page 24

5.3Motor Installation: XB and XC Motor Adapter Pumps

STEPS

1.On a used motor, file the motor shaft smooth where the set screws were seated.

2.Coat the motor shaft with an anti-seize compound.

3.Slide the shaft coupler onto the motor shaft until fully seated, and tighten the two set screws.

4.Place the motor adapter onto the motor, such that the one drain hole is locat- ed down and the four side access ports are horizontal when the pump is rein- stalled.

5.Coat the round end of the pump shaft and shaft key with an anti-seize com- pound.

6.Place the pump liquid-end assembly with pump shaft and shaft key into the motor adapter, with the key aligned with the coupler key way.

7.Install the four (4) 5/16-18NC bolts and tighten.

8.Using a wood dowel, place it against the pump shaft end located in the dis- charge port. Tap on the end of the wood dowel until the pump shaft is fully seated in the shaft coupler, and then tighten the cone-point set screw (Figure 4.6, Removal of Mechanical Seal Holder from Motor Adapter).

9.Reinstall the pump and pump piping connections.

10.Reinstall the motor wiring.

11.For pump start-up see Section 3.0 (Pump Installation).

5.4Motor Removal: X Motor Adapter Pumps

STEPS

1.Disconnect the motor electrical power.

2.Remove the wiring to the motor.

3.Remove the piping from the pump.

4.Remove the pump mounting bolts, and place the pump on a work bench.

5.Remove the four (4) 5/16-18NC bolts that hold the pump liquid end to the motor adapter.

18

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Osmonics TONKAFLO Pumps SS Series Page Introduction Tonkaflo Specifications Cutaway Drawings List of Figures Page Introduction Tonkaflo Specifications Capacities 2900 rpm 3500 rpm Maximum500 Hertz D e l S S 5 0 5 D e l S S 1 8 4 8 X B 5Pump Installation Inlet and Discharge Piping and Connections Inlet PipingInlet Piping Page Installation Discharge Screen Primed Before START-UPMotor Wiring Single-Phase Motors StepsChanging Motor Rotation Rolling the Leads to Balance Current Draw General Troubleshooting for ALL Pumps LOW Flow Motor Runs HOT or StopsSteps Page Page Force the Shaft Into the Impeller Bore Tonkaflo Pump Field Maintenance Motor Installation XB and XC Motor Adapter Pumps Steps Page Liquid END Tonkaflo Service Policy Tonkaflo Pump Return Goods Authorization RGA Procedure Dimensional Drawings 500X Motor Adapter PumpXB Motor Adapter Pump 1000X Motor Adapter Pump 1800XB Motor Adapter Pump 1800XC Motor Adapter Pump Cutaway Drawings XB and XC Motor Adapter Pump Standard Model Parts List DescriptionPart Number Series Ordering Parts Warranty Tonkaflo Pump Warranty Page USA France Thailand
Related manuals
Manual 42 pages 10.61 Kb

SS500, SS1800, SS1000 specifications

The GE SS1000, SS1800, and SS500 are advanced gas turbine models developed by General Electric, renowned for their efficiency, reliability, and adaptability in various applications. These turbines are integral to numerous power generation systems across the globe, catering to both industrial and utility sectors.

The GE SS1000 is one of the earlier models in this series, notable for its compact design and robust performance. Engineered for effective operation in both simple cycle and combined cycle power plants, the SS1000 offers a remarkable power output that can be tailored to meet the specific needs of the user. It features advanced materials and a sophisticated cooling system, which enhance its efficiency and longevity. Additionally, the SS1000's design focuses on ease of maintenance, allowing for quick inspections and component replacements, which minimizes downtime and operational costs.

Moving up the scale, the GE SS1800 provides enhanced performance capabilities, making it suitable for larger power demands. One of its significant characteristics is its high thermal efficiency, which is achieved through improved combustion technology and aerodynamic design. The SS1800 also integrates advanced digital controls that optimize its operation, resulting in superior load flexibility. This adaptability is crucial for power plants that need to respond swiftly to fluctuations in demand. Furthermore, the turbine features a modular design, allowing for easier upgrades and maintenance.

The GE SS500 represents a further evolution in gas turbine technology, characterized by its high output and fuel efficiency. This model utilizes advanced ceramic matrix composites, which enable higher operating temperatures without compromising performance. The SS500 is engineered for both gas and dual-fuel configurations, providing operational flexibility that is essential in today's energy landscape. Its advanced diagnostics and predictive maintenance capabilities help operators monitor performance and identify potential issues before they escalate, ensuring continuous and reliable power generation.

In summary, the GE SS1000, SS1800, and SS500 turbines are milestones in gas turbine technology. Each model offers unique features that cater to various power generation needs, with a strong emphasis on efficiency, adaptability, and reliability. As the energy sector continues to evolve, these turbines represent a pivotal innovation that ensures a sustainable and efficient energy future.
Top Page Image Contents