GE 71337, 106687 How To Assemble, Step a Unpack Body of Vacuum and Handle, Step B Attach Handle

Page 5

How To Assemble

CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.

CAUTION: Moving parts, stay clear of brush roll when plugging in. Make sure brush roll is clear of moving parts when plugging in.

NOTE: Features may vary by model yet all parts assemble the same.

Step A Unpack Body of Vacuum and Handle

Handle

Release

Button

Handle

Tabs

Vacuum Body

Handle

1.Remove vacuum body and handle from carton. Locate the handle release button on body and the handle tabs on handle.

Step B Attach Handle

2.Position handle above vacuum body. Line up the handle tabs to the notches in the opening at the top of the vacuum body.

3.Press down on the handle release button as shown above. Slide the handle down into the unit, until it clicks into place.

5

Image 5

Contents Owner’s Guide Model Important Safeguards Vacuum Cleaner SafetyConseils pour l’emploi correct de votre aspirateur Rating Plate General InformationCustomer Assistance Step B Attach Handle How To AssembleStep a Unpack Body of Vacuum and Handle How To Use How To Use Accessories Empty Dust Cup How To MaintainClean Brush Roll Authorized Appliance Parts Page Customer Assistance Two-Year Limited WarrantyDon’t Forget to Use GE Brand Replacement Parts Questions? Call Accessory Items in This CartonGuía del Propietario Modelo Importante Para SU Seguridad Seguridad en el uso de la aspiradoraPlaca de datos Información generalAyuda al cliente Paso B Acople el mango Como armarlaPaso a Desempaque el cuerpo de la aspiradora y el mango Botón para liberar el recipiente para polvo Como usarlaBotón para liberar la aspiradora manual Como usar los accesorios Vacíe el recipiente para polvo Cómo hacerle mantenimientoLímpie el cepillo circular Nota Cambie el filtro si está sucio o rotoPage Garantía limitada de dos años Atención al ClienteNo se olvide de usar Repuestos marca GE ¿Preguntas? Llame al Accesorios dentro de esta caja