Sherwood RD-5503 When selecting the Dolby Plii Music, When selecting the Pano Panorama mode

When selecting the DOLBY PLII MUSIC

•You can adjust the various surround parameters for optimum surround effect.

Note: The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.

ENGLISH

1. Press the CURSOR UP( )/DOWN( ) buttons to select the "PLII MSC", then press the ENTER button.

2. Press the CURSOR UP( )/DOWN( ) buttons to select the desired parameter.

3. Press the CURSOR LEFT( )/ RIGHT( ) buttons to adjust the selected parameter as desired.

When selecting the "PANO (Panorama)" mode

This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON"(default value:OFF).

When selecting the "C. WIDTH (Center width)" control

This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7 (default value : 3).

When selecting the "DIMEN (Dimension)" control

This gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to +3 (default value : 0).

4. Repeat the above steps 2 and 3 to adjust other parameters.

39