Sherwood RD-5503 When selecting the Distance, When selecting the desired unit

When selecting the DISTANCE

1. Press the CURSOR UP( )/DOWN( ) buttons to select the DISTANCE, then press the ENTER button.

ENGLISH

2. Press the CURSOR UP( )/DOWN( ) buttons to	3. Press the CURSOR LEFT( )/RIGHT( ) buttons to
select the desired item.		set the selected item as desired.

Note :	When selecting the desired unit
• You cannot select the speakers set to "N (None or No)".	• You can select either "M (Meter)" or "FT (Feet)".
	• Once a unit is selected, the distances are automatically
	changed in the selected unit.

When setting the distance

• You can set the distance within the range of 0.0 ~ 9.0 meters in 0.3 meter intervals (or 0 ~ 30 feet in 1 feet intervals).

4. Repeat the above steps 2 and 3 until the distances are all set as desired.

About the speaker distance

When enjoying multi-channel surround playback with Dolby Digital sources, etc., it is ideal that the center, surround and subwoofer speakers should be the same distance from the main listening position as the front speakers. By entering the distance between the listening position and each speaker, the delay times of center, surround and subwoofer speakers are automatically adjusted to create an ideal listening environment virtually as if the center, surround and subwoofer speakers were at their ideal locations respectively.

34