Consumer Support Troubleshooting Tips Installation

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Instructions Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips Installation

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

ASV14, ASV12, AST10, AST18, AST12 specifications

The GE ASM12, ASM16, AST12, ASM18, and ASP18 are state-of-the-art gas turbine systems designed to provide exceptional performance, reliability, and efficiency for power generation applications. These models reflect GE's commitment to innovation and technological advancement in the energy sector.

The ASM series, encompassing the ASM12, ASM16, and ASM18 models, is distinguished by its modular design and advanced aerodynamics. The ASM12 and ASM16, with their compact size, are ideal for a variety of installations, including peaking power plants and co-generation facilities. The ASM18, while slightly larger, boasts enhanced output and efficiency, making it suitable for base-load and intermediate-duty applications. Each model employs advanced materials that withstand high temperatures and pressures, resulting in improved performance and longevity.

The AST12 turbine is particularly noteworthy for its incorporation of integrated controls and advanced gas path technologies. This model emphasizes low emissions and high efficiency, utilizing advanced combustion systems that ensure cleaner operation. Its reliability and flexibility make it a preferred choice for operators seeking to optimize their power generation capabilities.

The ASP18 model stands out due to its ability to adapt to diverse fuel types, including natural gas and liquid fuels. This feature allows for greater operational flexibility and enables power plants to respond quickly to changes in energy demand. The ASP18 also features a robust digital control system that enhances monitoring and maintenance capabilities, ensuring optimal performance and reduced downtime.

All these models utilize GE's advanced digital twin technology, which provides operators with real-time monitoring and predictive analytics. This capability allows for proactive maintenance, reducing operational costs and extending the lifespan of turbine components.

In summary, the GE ASM12, ASM16, AST12, ASM18, and ASP18 turbines embody cutting-edge technology and design. They offer remarkable efficiency, reliability, and flexibility, making them suitable for a wide range of applications in the evolving energy landscape. With their emphasis on low emissions and adaptability to various fuel types, these turbines represent GE’s dedication to sustainable energy solutions and operational excellence in the global power generation industry.