Installation Instructions, Consumer, Remote Control

Operating Instructions Safety Instructions

About the controls on the air conditioner–models with touch pads.

Features and appearance will vary.

Low	Med	High	CIRCULAIRE	ENERGY
Fan	Fan	Fan	On	SAVER On
Fan	Fan	Fan	On	SAVER On
On	On	On

Cool

Mode On

Fan				Timer
Only				On
Only				On
On
On

Air Conditioner Controls

Remote Control

Installation Instructions

ON/OFF

Turns air conditioner on and off.

Display

MODE

Use to set the air conditioner to COOL or FAN.

Increase ▲ /Decrease ▼ Pads

Use to set temperature when in COOL mode.

FAN

Use to set the fan speed at LOW, MED or HIGH.

TIMER

ON–When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous setting. Each touch will set the time in hours.

OFF–When the air conditioner is on, it can be set to automatically turn off in 1 to 24 hours. Each touch will set the time in hours.

To cancel the timer, press the TIMER pad until the display time disappears.

Support Troubleshooting Tips

CIRCULAIRE

Turn on to provide continuous side-to-side air circulation.

For fixed side-to-side air direction, turn ON until the desired air direction is obtained, then turn it OFF.

ENERGY SAVER–Controls the fan.

ON–The fan and compressor cycle on and off. This results in wider variations of room temperature and humidity. Normally used when the room is unoccupied.

Note: The fan will continue to run for a short time after the compressor cycles off.

OFF–The fan runs all the time, while the compressor cycles on and off.

This switch must be set at OFF in order to use the fan settings (on the mode control).

SLEEP

Press to set the air conditioner to run for 8 hours before it automatically shuts off.

When the SLEEP pad is pressed, SLEEP scrolls across the display for approximately 15 seconds, then shows the time remaining.

One hour after the sleep timer is set, the set temperature will automatically increase 1°F.

To cancel the sleep mode, press the SLEEP pad a second time.

Note: The sleep timer will be cancelled if the TIMER, ENERGY SAVER or MODE pad is pressed.

Remote Control Signal Receiver

Consumer

Remote Control

■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

4■ The remote control signal has a range of up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly–see the Care and Cleaning section.

ASV14, ASV12, AST10, AST18, AST12 specifications

The GE ASM12, ASM16, AST12, ASM18, and ASP18 are state-of-the-art gas turbine systems designed to provide exceptional performance, reliability, and efficiency for power generation applications. These models reflect GE's commitment to innovation and technological advancement in the energy sector.

The ASM series, encompassing the ASM12, ASM16, and ASM18 models, is distinguished by its modular design and advanced aerodynamics. The ASM12 and ASM16, with their compact size, are ideal for a variety of installations, including peaking power plants and co-generation facilities. The ASM18, while slightly larger, boasts enhanced output and efficiency, making it suitable for base-load and intermediate-duty applications. Each model employs advanced materials that withstand high temperatures and pressures, resulting in improved performance and longevity.

The AST12 turbine is particularly noteworthy for its incorporation of integrated controls and advanced gas path technologies. This model emphasizes low emissions and high efficiency, utilizing advanced combustion systems that ensure cleaner operation. Its reliability and flexibility make it a preferred choice for operators seeking to optimize their power generation capabilities.

The ASP18 model stands out due to its ability to adapt to diverse fuel types, including natural gas and liquid fuels. This feature allows for greater operational flexibility and enables power plants to respond quickly to changes in energy demand. The ASP18 also features a robust digital control system that enhances monitoring and maintenance capabilities, ensuring optimal performance and reduced downtime.

All these models utilize GE's advanced digital twin technology, which provides operators with real-time monitoring and predictive analytics. This capability allows for proactive maintenance, reducing operational costs and extending the lifespan of turbine components.

In summary, the GE ASM12, ASM16, AST12, ASM18, and ASP18 turbines embody cutting-edge technology and design. They offer remarkable efficiency, reliability, and flexibility, making them suitable for a wide range of applications in the evolving energy landscape. With their emphasis on low emissions and adaptability to various fuel types, these turbines represent GE’s dedication to sustainable energy solutions and operational excellence in the global power generation industry.