Toshiba M10 manual Installing the lamp cover, Install the light guide sheet in the backlight unit

4 Replacement Procedures 4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)

2.Seat the lamp cover on the backlight unit and secure it with two screws.

Backlight unit

Lamp cover

VW

Tighten the screws with 1.0kgf•cm of torque.

Screw	Screw
Detail of V	Detail of W
	Align the holes on the lamp cover
	with the pins on the frame.

Figure 4-137 Installing the lamp cover

3.Install the light guide sheet in the backlight unit.

Insert the light guide sheet straight to avoid deforming any sheets.

Insert three tabs on the edge of

3the light guide sheet into the notches on the frame as ordered in

this illutration.

2

1

Light guide sheet

Figure 4-138 Installing the light guide sheet

4-160 Satellite Pro M10 Series Maintenance Manual (960-431)