2 Troubleshooting Procedures | 2.13 Bluetooth Troubleshooting |
2.13 Bluetooth Troubleshooting
This section describes how to determine if the computer's Bluetooth functions are working properly. Perform the steps below starting with Procedure 1 and continuing with the other procedure as required.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check and Replacement Check
Procedure 1 Diagnostic Test Program Execution Check
Make sure the wireless communication switch on the front side of the computer is turned on. If it is not, slide the switch toward the right to turn it on.
The Bluetooth Diagnostic test program is stored on the computer's diagnostic disk. This program checks the Bluetooth function. Insert the diagnostics disk in the floppy disk drive, turn the computer on and run the test. Refer to Chapter 3, Tests and Diagnostics, for details.
If an error occurs while executing the Bluetooth diagnostics test, go to Procedure 2.
Satellite Pro M10 Series Maintenance Manual |
