4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43) | 4 Replacement Procedures |
13. Connect the FPC to the connector on the source PCB.
Source PCB
Pin*
Screw
Make sure the latch secures the connector correctly. See the notches on both the edge of the FPC, and see the contour of the connector.
Insert the FPC into the connector firmly. The FPC must have no inclination. Lock the connector firmly.
NG: The FPC has inclination.
NG: The FPC does not connect firmly.
Screw
Screw
Pin*
Pin*
FPC
Do not let the PCB lie on the rib of the frame.
Tighten the screws with 0.9 kgf•cm of torque.
Gate PCB
Screw
*Align the holes on the PCBs with the pins.
Figure 4-121 Securing the PCBs and connecting the FPC
Satellite Pro M10 Series Maintenance Manual |
