4 Replacement Procedures | 4.30 TFT FL (Model 15.0 XGA LG. Philips LP150X06 A2) |
8.Disassembly of Board Ass’y. This process should be made in Clean room with no scratch nor particle on Polarizer and B/L Ass’y.
9.Disassembly of Tape Adhesive used for Sheets fixing (4 Point).
10.Disassembly of Sheets and Light guide. No penetration of foreign body is indispensable with no scratch on the surface of each Sheets.
11.Disassembly of Screw and Cover Ass’y bottom (L). Maximum value of torque with Screw should be below 1.5kg.
Figure 4-85 Disassembly of Board Ass’y, Tape Adhesive, Light guide, Cover Ass’y bottom(L)
| Satellite Pro M10 Series Maintenance Manual |
