2 Troubleshooting Procedures

2.14 Wireless LAN Troubleshooting

2.14 Wireless LAN Troubleshooting

This section describes how to determine if the computer's Wireless LAN is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedure as required.

Procedure 1: Diagnostic Test Program Execution Check

Procedure 2: Connector Check and Replacement Check

Procedure 1 Diagnostic Test Program Execution Check

Make sure the wireless communication switch on the front side of the computer is turned on. If it is not, slide the switch toward the right to turn it on.

The Wireless LAN Diagnostic test program is stored on the computer's diagnostic disk. This program checks the Wireless LAN function. Insert the diagnostics disk in the external floppy disk drive which is connected to a USB port of the computer, turn the computer on and run the test. Refer to Chapter 3, Tests and Diagnostics, for details.

If an error occurs while executing the Wireless LAN diagnostics test, go to Procedure 2.

2-54

Satellite Pro M10 Series Maintenance Manual (960-431)

Page 100
Image 100
Toshiba M10 manual Troubleshooting Procedures Wireless LAN Troubleshooting