4 Replacement Procedures | 4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13) |
5.Seat the LCD panel on the backlight unit assembled by the steps above. Make sure there is no dust between the LCD panel and the backlight unit. If you find any foreign matter, remove it.
LCD panel
Backlight unit
Guide rib |
Make sure the LCD panel fits into the panel guide ribs.
Figure 4-140 Installing the LCD panel
6. Fold the TCP of the source PCB, then the TCP of the gate PCB down.
TCP of source PCB
Do not grasp both ends.
Do not grasp both ends.
TCP of gate PCB
Figure 4-141 Folding TCPs down
Satellite Pro M10 Series Maintenance Manual |
