3.6 Keyboard Test

3 Tests and Diagnostics

3.6Keyboard Test

To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter.

Subtest 01 Pressed Key Display

NOTE: The Num Lock and the Overlay mode must be off to execute this subtest.

When you execute this subtest, the keyboard layout is drawn on the display as shown below. When any key is pressed, the corresponding key on the screen changes to the key that was pressed. Holding a key down enables the auto- repeat function, which causes the key’s display character to blink.

To exit this subtest, press Del + Enter

Fn

Satellite Pro M10 Series Maintenance Manual (960-431)

3-15

Page 121
Image 121
Toshiba M10 manual Keyboard Test Tests and Diagnostics