2.6 HDD Troubleshooting | 2 Troubleshooting Procedures |
Procedure 5 Connector Check and Replacement Check
The HDD or the system board may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks:
Check 1 Make sure the HDD is firmly connected to PJ1509 on the system board.
HDD
PJ1509 System board
If the connections are loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2.
Check 2 The HDD may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 3.
Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4.
Satellite Pro M10 Series Maintenance Manual |
