Toshiba M10 manual No Drive, PCI BUS = IRQ10, IRQ11

3.28 SETUP			3 Tests and Diagnostics
		OPTIONS
	DMA
		= Channel 3 (Default)

For most printers, the port should be set to ECP. With some other parallel devices, the setting should be Std. Bi-Direct.

11.Drives I/O

This option displays the address and interrupt level for hard disk drive, CD/DVD- ROM drive and PC card. It is for information only and cannot be changed.

(a)Built-in HDD

Primary IDE (1F0H/IRQ14) The Built-in HDD is ready for use.

No Drive The Built-in HDD is not installed.

(b)Select Bay

This option is displayed only when the hard disk drive or optical disk drive is installed to the select bay. Secondary IDE (170H/IRQ15) Computer Selectable Bay HDD.

(c)PC Card

When an ATA card is installed in IN13h, the sub window below is displayed.

Built-in HDD	DRIVES I/O		IDE (1F0H/IRQ14)
	=	Primary
ATA Card	=	Others (190H/IRQ)

12.PCI Bus

This item displays the interrupt level for the Card Bus. It is for information only and cannot be changed.

PCI BUS = IRQ10, IRQ11

13.PC Card

This option displays the PC Card Controller mode. It is for information only and cannot be changed.

Controller Mode = Auto-Selected

Satellite Pro M10 Series Maintenance Manual (960-431) 3-91