Applying the protective cover-S and taps

4 Replacement Procedures

4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)

14.Apply the protective cover-S, the aluminum tape and the wire-protective tape.

Apply the protective cover-S along the top frame and fold the cover to the side.

Protective cover-S

Secure the cable with wire-protective tape. Be sure the cable lies flat.

0 ‘1mm

Align the holes on the protective cover with the pins on the P-chassis.

Aluminum sheet

Apply the aluminum tape around the center of the module.

0 ‘0.5m m

Align the edge of the tape with the edge of the frame.

Figure 4-147 Applying the protective cover-S and taps

4-166