Toshiba M10 manual Touch Pad Replacement Procedures, Remove the touch pad cover and touch pad

4.11 Touch Pad 4 Replacement Procedures

2.Hold the palm rest with both hands and then slightly bend it to release two latches securing each sides of the touch pad cover. Be careful not to bend the palm rest excessively, or it will be broken.

3.Remove the touch pad cover and touch pad.

4.Disconnect the pad cable from the connector on the touch pad.

Touch pad cover and

Touch pad

Palm rest

Figure 4-28 Removing the touch pad

Installing the Touch Pad

To install the touch pad, follow the steps below and refer to Figures 4-27 and 4-28.

1.Connect the pad cable to the connector on the touch pad.

2.Assemble the touch pad cover and touch pad, and then seat them to secure them with four latches.

3.Secure the touch pad with two M2.5⋅5 black flat-head screws and two M2.5⋅4 screws.

Satellite Pro M10 Series Maintenance Manual (960-431) 4-43