Toshiba M10 manual Replacement Procedures LCD Module, Removing the LCD Module

4 Replacement Procedures 4.24 LCD Module

4.24 LCD Module

NOTE: Be careful not to apply pressure to the ICs along the edge of LCD module. The ICs are easily damaged.

NOTE: For environmental reasons, do not throw away a malfunctioning LCD module (or FL). Please follow local ordinances or regulations for its disposal.

Removing the LCD Module

To remove the LCD Module, follow the steps below and refer to Figures 4-48 to 4-50.

1.Remove four masking seals that cover the screws.

2.Remove four M2⋅4 flat-head screws that fasten the LCD module.

Masking seal

M2⋅4 flat-head screws

M2⋅4 flat-head screws

Masking seal

Figure 4-48 Removing the screws that secure the LCD module

4-70 Satellite Pro M10 Series Maintenance Manual (960-431)