4.1 General | 4 Replacement Procedures |
Tools and Equipment
The use of Electrostatic Discharge (ESD) equipment is very important for your safety and the safety of those around you. Proper use of these devices will increase the success rate of your repairs and lower the cost for damaged or destroyed parts. The following equipment is necessary to disassemble and reassemble the computer:
One M2 point size 0 Phillips screwdriver to remove and replace screws.
One 4 mm
Tweezers, to lift out screws that you cannot grasp with your fingers.
ESD mats for the floor and the table you are working on.
An ESD wrist strap or heel grounder.
Air ionizers in highly static sensitive areas.
Plastic card of the size of credit card.
Antenna coaxial cable disconnector
Satellite Pro M10 Series Maintenance Manual |
