4 Replacement Procedures | 4.28 TFT FL (Model 14.1 XGA LG. Philips |
Removing the board assembly, tape pad sheet, light guide, cover bottom and lamp assembly
12. Remove the board assembly (1).
CAUTION: This process should be made in the clean room with no scratch nor particle on the Polarize and B/L assembly .
13.Remove the tape pad (2) used for sheets fixing.
14.Remove the sheets and light guide (3).
CAUTION: No penetration of foreign body is indispensable with no scratch on the surface of each sheet.
15. Remove the screw and cover bottom (4).
CAUTION: Maximum value of torque with screw should be below 2.0kgf.cm
16.Disconnect the low voltage wire from mold frame and disassembly of the lamp assembly from mold frame (5).
CAUTION: Pressure or stress should not be given on this wire.
Glue or foreign body of the double tape should not be attached in the mold frame.
Satellite Pro M10 Series Maintenance Manual |
