4 Replacement Procedures | 4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13) |
14.Turn the backlight unit right side up.
15.Remove three strips of shield tape, the optical sheet, the upper lens sheet, the lower lens sheet, the lower diffuser sheet and the light guide sheet. Be careful not to damage or stain the sheets because they are reused. Dispose of the removed shield tape.
Shield tape | Shield tape |
Shield tape
Optical sheet
Upper lens sheet
Lower lens sheet
Lower diffuser sheet
Light guide sheet
Figure 4-134 Removing the sheets
16.Turn the backlight unit upside down.
17.Gently remove the FL taking care not to damage it.
Frame
FL
Figure 4-135 Removing the FL
NOTE: Be careful not to crease the reflective sheet when you remove the FL assembly.
Satellite Pro M10 Series Maintenance Manual |
