TFT FL Model 14.1 XGA LG. Philips LP141X7-C1TO

4 Replacement Procedures

4.28 TFT FL (Model 14.1 XGA LG. Philips LP141X7-C1TO)

Removing the TFT FL (Model 14.1 XGA LG. Philips LP141X7-C1TO)

To remove the TFT FL (Model 14.1 XGA LG. Philips LP141X7-C1TO), follow the steps below and refer to figures 4-66 to 4-69.

1. Remove the tape adhesive (1) used for the B/L wire fixing.

CAUTION: Pressure or stress should not be given on the B/L wire

2.Remove the tape adhesive (2) used for the top case fixing

3.Remove the cover shield (C) (3)

CAUTION: Pressure or stress should not be given on control the PCB

Usage of gloves with the anti-electric discharge coating is recommended. To eliminate possible damage on circuits occurred by the ESC.

4. Remove the cover shield (G) (4)

CAUTION: Pressure or stress should not be given on the gate TCP

5. Remove the tape adhesive (5), (6) used for the top case fixing.

CAUTION: Pressure or stress should not be given on the top case during this process.

4-90	Satellite Pro M10 Series Maintenance Manual (960-431)