4.19 System Board

4 Replacement Procedures

4.Remove two strips of tape securing the modem cable.

5.Disconnect the modem cable from PJ2018 on the system board.

PJ2018

Modem cable

Tapes

Figure 4-41 Removing the modem cable

Installing the System Board

To install the system board, follow the steps below and refer to Figures 4-39 to 4-41.

1.Connect the modem cable to PJ2018 on the system board.

2.Secure the modem cable with two strips of tape.

3.Connect AC adaptor jack to PJ8800 on the system board.

4.Seat the system board. Be sure to align the sliding lever of the wireless communication switch with S2302 on the system board.

5.Seat the AC adaptor jack.

Satellite Pro M10 Series Maintenance Manual (960-431)

4-61

Page 273
Image 273
Toshiba M10 manual Installing the System Board, Seat the AC adaptor jack