Toshiba M10 manual Tests and Diagnostics Bluetooth Test

3 Tests and Diagnostics 3.20 Bluetooth Test

3.20 Bluetooth Test

This section describes how to perform the Bluetooth test program to check if the Bluetooth functions of computer are working properly. To start the Bluetooth test program, follow the steps below:

NOTE: Use another computer that can communicate by the Bluetooth as a reference machine to perform this test.

Insert a floppy disk containing the test program into the target machine and turn on the target machine. The following Bluetooth test menu will appear:

#######################################################################

#### Bluetooth sub system test program VX.XX####

#######################################################################		*
*	1..... BD_ADDR check
*		*
*	3..... communication test (DUT mode)	*
*		*
*	T..... communication test (TEST mode)	*
*		*
*		*

************************************************************************

....Press test number [1, 3, T] ? _

Press 1 or 3 key to perform the corresponding subtest. To quit the Bluetooth test program, eject the floppy disk and turn the computer off while the menu above is displayed.

3-52 Satellite Pro M10 Series Maintenance Manual (960-431)