Toshiba M10 manual Applying the protective cover-S

4 Replacement Procedures 4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)

17. Apply the protective cover-S.

Apply the cover along the top frame and fold the cover to the side.

Align the cover's edge with the edge of the plastic part of the connector

Make sure that the amount of displacement is ±0.5 mm or less.

The edge of the plastic part of the connector

Align the cover's edge

with the PCB's edge. 0 to 1 mm

0 to 1 mm

Apply the cover's edge close to the screw. (both right and left)

Figure 4-125 Applying the protective cover-S

4-152 Satellite Pro M10 Series Maintenance Manual (960-431)