Toshiba M10 manual Executing the Diagnostic Test Tests and Diagnostics

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics

3.2Executing the Diagnostic Test

Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps:

1.Insert the Diagnostics disk in the floppy disk drive and turn on the computer while pressing U.

(The Diagnostics Disk contains the MS-DOS boot files.)

NOTE: To execute the CD-ROM or DVD-ROM test, make sure the CD-ROM and CD- ROM drive or DVD-ROM and DVD-ROM drive is installed in the computer.

The following menu will appear:

TOSHIBA Personal Computer xxxxxxx DIAGNOSTICS

Version X.XX (C) Copyright TOSHIBA Corp. XXXX

DIAGNOSTICS MENU :

1 - DIAGNOSTIC TEST

2-

3-

4- HEAD CLEANING

5- LOG UTILITIES

6- RUNNNING TEST

7- FDD UTILITIES

8- SYSTEM CONFIGURATION

9- EXIT TO MS-DOS

0 - SETUP

↑↓→← : Select items

Enter: Specify

Esc : Exit

NOTE: To exit the DIAGNOSTIC TEST MENU, press Esc. If a test program is in progress, press Ctrl + Break to exit the test program, or press Ctrl + C to stop the test program.

Satellite Pro M10 Series Maintenance Manual (960-431) 3-3