GE ASQ14, ASV10, ASM10*, ASM08* Storm Window Requirements, Remove the Front Grille if Attached

Page 11

Window Installation Instructions

1 WINDOW REQUIREMENTS

• These instructions are for a standard

double-hung window. You will need

to modify them for other types of

windows.

CAUTION: If the sill support

bolts do not contact the window sill,

or if you have a window without a sill,

you must order accessory kit RAK87 to

properly install this air conditioner. Call

800.626.2002 or visit ge.com.

• All supporting parts must be secured

to firm wood, masonry or metal.

• The electrical outlet must be within

reach of the power cord.

• Follow the dimensions in the table and

illustration for your model.

2STORM WINDOW REQUIREMENTS

A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.

To adjust for this, attach a piece of wood to the sill.

WOOD PIECES –

WIDTH: 2″

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the sill to make it 1/2″ higher than the top of the storm window frame or the vinyl frame.

Attach securely with nails or screws provided by the installer.

Models

A

B

ASD06, ASM08, ASQ10,

14 3/4″ min.

24 3/4″–36″

ASV10

 

 

ASM10, ASQ12, ASV12

15 3/8″ min.

26″–39 1/2″

ASM12, ASQ14, ASV14

16 1/4″ min.

26″–39 1/2″

 

 

 

1/2″ higher than storm window frame

Storm window frame

1/2″ higher

than vinyl frame (on some windows)

Wood

Sill

Vinyl frame

A

B

(With accordion panels)

3REMOVE THE FRONT GRILLE (IF ATTACHED)

ARemove shipping tape, if present.

On models with a raise-up inlet grille,

lift it and remove the screw behind it (if present) that holds the grille in place.

On models with a

slide-out air filter, remove it and the screw behind it (if present) that holds the grille in place.

B Gently but firmly grasp

the lower grille corners, press in on the case sides and pull forward

to release.

NOTE: Do not pull the bottom edge toward you more than 3″ or

you may damage the tabs of the grille.

CLift the grille up and off the top tabs.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Write the model and serial numbers here Model # Serial # Air ConditionersDo not use an adapter plug with this appliance Consumer Support Troubleshooting TipsGe.com USE of Extension CORDS-115-Volt models onlyConsumer Remote ControlAir Direction-Up and Down on some models Power Outage Recovery FeatureCool Mode Fan ModeTroubleshooting Tips Installation Instructions Operating Air Direction-Side-to-Side Safety InstructionsOutdoor Coils Care and cleaning of the air conditionerHow to Insert the Batteries Grille and CaseTools YOU will Need Before YOU BeginElectrical Requirements Parts Included Window Installation InstructionsRemove the Front Grille if Attached Window RequirementsStorm Window Requirements Prepare the Case Remove the AIR Conditioner from the CaseInstall the Case in the Window Install the CaseInstall the Security Bracket and the Foam TOP Window Gasket Install the AIR Conditioner in the Case Finish the Wall Opening Through-the-Wall Installation Instructions-OptionalNormal Operating Sounds Troubleshooting Tips…We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace GE Air Conditioner WarrantyWhat Is Not Covered Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances WebsiteAcondicionadores de Aire Seguridad ¡ADVERTENCIA Solucionar problemas Apoyo al consumidorLas funciones y el aspecto pueden variar Control remotoModo de FAN Ventilador InstalaciónFunción de recuperación de pérdida de energía Modo Cool FrioControl de Mode/Temp Modo/Temp Control de Mode ModoInterruptor ON/OFF Interruptor de Fan VentiladorDirección del aire-de lado a lado Seguridad Cuidado y limpieza del acondicionador de airePrecaución no Opere el Requisitos Electricos Antes DE IniciarPartes Incluidas Herramientas QUE Usted NecesitaráRequisitos DE UNA Ventana DE Tormentas Requisitos Para LA VentanaRetire EL Acondicionador DE Aire DE LA Caja Retire LA Parrilla Frontal SI Está PegadaInstale LA Caja EN LA Ventana Prepare LA CajaInstale EL Acondicionador DE Aire EN LA Caja Instale LA CajaImportante Instrucciones de instalación a través de la pared-opcionalExterior Termine LA Abertura EN LA ParedSolucionar problemas Sonidos de operación normales Lo que no está cubierto Garantía de su acondicionador de aire de GEOperación GE reemplazaráPiezas y accesorios Apoyo al Consumidor Página Web de GE AppliancesSolicite una reparación Garantías ampliadas

ASQ14, ASQ10, ASQ12, ASM08*, ASM10* specifications

The GE ASV10, ASM08*, ASQ14, ASQ12, and ASM10* are part of General Electric's advanced range of automation and control solutions designed for various industrial applications. These products are notable for their high performance, flexibility, and the ability to meet diverse operational requirements across several sectors.

The ASV10 is a versatile automation solution offering significant scalability options. It integrates seamlessly with multiple device types and supports various communication protocols, enabling users to create comprehensive control systems tailored to their specific needs. This feature facilitates easy integration into existing systems while allowing for future expansions.

ASM08*, on the other hand, is known for its rugged design and robust performance in challenging environments. It is equipped with advanced processing capabilities that enhance reliability in data management and real-time decision-making. The ASM08* supports a wide range of I/O configurations, making it an ideal choice for applications that require high adaptability.

Moving to the ASQ14 and ASQ12, these models are characterized by their sophisticated quality control features. They are designed to excel in environments where precision and reliability are paramount. These systems feature advanced data analytics, allowing operators to monitor processes in real-time and make informed decisions based on accurate information. The ASQ series also includes built-in diagnostic tools that facilitate troubleshooting and minimize downtime.

The ASM10* is another noteworthy addition, emphasizing high-speed processing and efficient energy management. This model supports cutting-edge technologies such as machine learning algorithms, allowing for predictive maintenance and enhanced operational efficiency. Its architecture is designed to optimize resource use, ensuring that users can maintain productivity while reducing operational costs.

In summary, the GE ASV10, ASM08*, ASQ14, ASQ12, and ASM10* showcase a commitment to innovation and excellence in automation technology. With features that cater to a wide array of industrial challenges — from scalability and integration to precision and efficiency — these products stand out as reliable solutions for modern automation needs. Together, they represent GE's dedication to advancing industry standards and providing tools that empower organizations to succeed in a competitive landscape.
Top Page Image Contents