Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 If necessary, press 
(ON/OFF) button.
Result: ◆ The On/Off indicator on the unit comes on.
◆ The air conditioner runs in the mode selected when ◆ the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆ Plugged in ◆ Stopped
lt will start up normally after three minutes.
2 To select the DRY mode, press the Mode button until 
is displayed at the top of the wireless remote controller.
Result: ◆ The indoor unit beeps.
◆ The air conditioner runs in DRY mode.
Note You can change modes at any time.
3To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive.
Result: ◆ Each time you press Temperature buttons: - The temperature is adjusted by 1OC.
- The indoor unit beeps.
◆ The air conditioner starts removing the excess humidity. The quantity of air is adjusted automatically.
Note In the dry mode, the fan speed is controlled automatically.
4To control the direction of the air flow, refer to page 25.