Cooling Your Room

You must select the COOL mode if you wish to adjust the : ◆ Cooling temperature

◆ Fan speed when cooling

1 If necessary, press (ON/OFF) button.

Result: ◆ The On/Off indicator on the wired remote controller comes on.

◆ The air conditioner runs in the mode selected when ◆ the unit was last used.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

2 To select the COOL mode, press the Mode button until is displayed at the top of the wired remote controller.

Result: ◆ The air conditioner runs in COOL mode.

Note You can change modes at any time.

3 To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive.

Result: ◆ Each time you press Temperature buttons: - The temperature is adjusted by 1OC.

◆ The air conditioner starts cooling, provided that the room

◆ temperature is higher than the selected temperature ; the fan

◆will, however, operate.

4Select the fan speed by pressing the Fan button one or more times until the intended value is displayed :

Automatic(rotated : ➔ ➔ )