GE 30036P, 3828A owner manual Before you call for service…, Normal Operating Sounds

Page 14

Tips InstallationInstructions OperatingInstructions SafetyInstructions

Before you call for service…

Troubleshooting Tips

Save time and money! Review the chart below first and you may not need to call for service.

Problem

 

Possible Causes

What To Do

 

 

 

 

Air conditioner

 

The air conditioner

• Make sure the air conditioner plug is pushed

does not start

 

is unplugged.

completely into the outlet.

 

 

 

 

 

 

The fuse is blown/circuit

• Check the house fuse/circuit breaker box and replace

 

 

breaker is tripped.

the fuse or reset the breaker.

 

 

 

 

 

 

Power failure.

• If power failure occurs, turn the mode control to OFF.

 

 

 

When power is restored, wait 3 minutes to restart the

 

 

 

air conditioner to prevent tripping of the compressor

 

 

 

overload.

 

 

 

 

Air conditioner does

 

Airflow is restricted.

• Make sure there are no curtains, blinds or furniture

not cool as it should

 

 

blocking the front of the air conditioner.

 

 

 

 

 

 

The temp control may

• Turn the knob to a higher number. The highest setting

 

 

not be set high enough.

provides maximum cooling.

 

 

 

 

 

 

The air filter is dirty.

• Clean the filter at least every 30 days.

 

 

 

See the Operating Instructions section.

 

 

 

 

 

 

The room may have been hot.

• When the air conditioner is first turned on you need to

 

 

 

allow time for the room to cool down.

 

 

 

 

 

 

Cold air is escaping.

• Check for open furnace floor registers and cold

 

 

 

air returns.

 

 

 

• Set the air conditioner’s vent to the closed position.

 

 

 

 

 

 

Cooling coils have iced up.

• See “Air conditioner freezing up” below.

 

 

 

 

Air conditioner

 

Ice blocks the air flow

• Set the mode control at HIGH FAN or HIGH COOL

freezing up

 

and stops the air conditioner

with the temp at 1 or 2.

 

 

from cooling the room.

 

 

 

 

 

Troubleshooting

CustomerService

Normal Operating Sounds

■You may hear a pinging noise caused by water being picked up and thrown against the condenser on rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency.

■You may hear the thermostat click when the compressor cycles on and off.

■Water will collect in the base pan during high humidity or on rainy days. The water may overflow and drip from the outdoor side of the unit.

■The fan may run even when the compressor does not.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 3828A30036P Pub. No -7391 JRGE & You, a Service Partnership Two easy ways to register your applianceSafety Precautions USE of Adapter Plugs -115-Volt models only Read and follow this Safety Information carefullyOperatingInstructions Safety Controls Mode ControlsAbout the controls on the air conditioner Temp ControlsAir Direction Up and Down Vent ControlAir Direction Side-to-Side Outdoor Coils Care and cleaning of the air conditionerGrille and Case Air FilterElectrical Requirements Preparing to install the air conditionerBefore You Begin Tools You Will NeedWindow Installation Instructions Parts IncludedWindow Requirements Storm Window RequirementsPrepare the Window and the Case Remove the Air Conditioner From the CaseInstall the Case in the Window Prepare the WindowSafety Instructions Operating Instructions Install the Air Conditioner in the CaseBefore you call for service… Normal Operating SoundsSafety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover Air Conditioner WarrantyGE Will Replace For The PeriodService Telephone Numbers

3828A, 30036P specifications

The GE 3828A,30036P is a sophisticated generator control system designed to enhance the performance and reliability of power generation facilities. This advanced system features an array of cutting-edge technologies and characteristics, making it a crucial component in modern energy management.

One of the standout features of the GE 3828A,30036P is its integrated digital control capabilities. This allows for precise monitoring and management of generator operations, significantly improving efficiency and reducing downtime. The system employs state-of-the-art algorithms that optimize generator performance, ensuring that it operates at peak efficiency under varying load conditions.

Another key technology incorporated into the GE 3828A,30036P is its robust telecommunications interface. This interface enables seamless communication between the generator and other components of the power infrastructure, facilitating real-time data exchange and remote monitoring. This is particularly beneficial for operators who need to maintain oversight of generator performance without being physically present at the site.

The GE 3828A,30036P also includes advanced protective features that enhance the safety and longevity of the generator. These protective mechanisms monitor key parameters such as temperature, voltage, and current, triggering alarms and safety measures if any anomalies are detected. This proactive approach helps to prevent damage to the equipment and ensures uninterrupted power supply.

In addition, the system boasts user-friendly software that simplifies the control and configuration of the generator settings. Operators can easily adjust parameters and access performance data through intuitive graphical interfaces, improving usability and reducing training time for personnel.

Furthermore, the GE 3828A,30036P is designed with scalability in mind, allowing it to be used in a wide range of applications from small standalone generators to large power generation plants. This versatility ensures that it can meet the needs of various industries, including commercial, industrial, and utility sectors.

In conclusion, the GE 3828A,30036P generator control system combines innovative technologies and essential features that enhance the reliability, efficiency, and safety of power generation operations. Its digital control capabilities, robust telecommunications interface, advanced protective features, user-friendly software, and scalability make it an essential choice for modern energy management solutions.
Top Page Image Contents