GE 30036P Preparing to install the air conditioner, Before You Begin, Electrical Requirements

Page 8

SafetyInstructions

Preparing to install the air conditioner.

Read these instructions completely and carefully.

Before You Begin

OperatingInstructions

NOTE TO INSTALLER: Leave these instructions with the air conditioner after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual and Installation Instructions for future use.

IMPORTANT NOTES:

For personal safety, this air conditioner must be properly grounded.

It is important to have the wall outlet and circuit checked by a qualified electrician if there is any doubt as to whether a proper ground exists.

Follow National Electric Codes (NEC) and/or local codes and ordinances.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

Electrical Requirements

Some models require 115/120-volt a.c., 60 Hz grounded outlet protected with

a 15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

TroubleshootingTips Installation Instructions

CustomerService

Tools You Will Need

■ Phillips-head screwdriver

■ Pencil

■ Flat-blade screwdriver

■ Level

■ Ruler or tape measure

■ Hammer

■ Scissors or knife

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 3828A30036P Pub. No -7391 JRGE & You, a Service Partnership Two easy ways to register your applianceSafety Precautions USE of Adapter Plugs -115-Volt models only Read and follow this Safety Information carefullyOperatingInstructions Safety Mode Controls About the controls on the air conditionerControls Temp ControlsAir Direction Up and Down Vent ControlAir Direction Side-to-Side Care and cleaning of the air conditioner Grille and CaseOutdoor Coils Air FilterPreparing to install the air conditioner Before You BeginElectrical Requirements Tools You Will NeedWindow Installation Instructions Parts IncludedWindow Requirements Storm Window RequirementsPrepare the Window and the Case Remove the Air Conditioner From the CaseInstall the Case in the Window Prepare the WindowSafety Instructions Operating Instructions Install the Air Conditioner in the CaseBefore you call for service… Normal Operating SoundsSafety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Air Conditioner Warranty GE Will ReplaceWhat GE Will Not Cover For The PeriodService Telephone Numbers

3828A, 30036P specifications

The GE 3828A,30036P is a sophisticated generator control system designed to enhance the performance and reliability of power generation facilities. This advanced system features an array of cutting-edge technologies and characteristics, making it a crucial component in modern energy management.

One of the standout features of the GE 3828A,30036P is its integrated digital control capabilities. This allows for precise monitoring and management of generator operations, significantly improving efficiency and reducing downtime. The system employs state-of-the-art algorithms that optimize generator performance, ensuring that it operates at peak efficiency under varying load conditions.

Another key technology incorporated into the GE 3828A,30036P is its robust telecommunications interface. This interface enables seamless communication between the generator and other components of the power infrastructure, facilitating real-time data exchange and remote monitoring. This is particularly beneficial for operators who need to maintain oversight of generator performance without being physically present at the site.

The GE 3828A,30036P also includes advanced protective features that enhance the safety and longevity of the generator. These protective mechanisms monitor key parameters such as temperature, voltage, and current, triggering alarms and safety measures if any anomalies are detected. This proactive approach helps to prevent damage to the equipment and ensures uninterrupted power supply.

In addition, the system boasts user-friendly software that simplifies the control and configuration of the generator settings. Operators can easily adjust parameters and access performance data through intuitive graphical interfaces, improving usability and reducing training time for personnel.

Furthermore, the GE 3828A,30036P is designed with scalability in mind, allowing it to be used in a wide range of applications from small standalone generators to large power generation plants. This versatility ensures that it can meet the needs of various industries, including commercial, industrial, and utility sectors.

In conclusion, the GE 3828A,30036P generator control system combines innovative technologies and essential features that enhance the reliability, efficiency, and safety of power generation operations. Its digital control capabilities, robust telecommunications interface, advanced protective features, user-friendly software, and scalability make it an essential choice for modern energy management solutions.
Top Page Image Contents