GE 30036P, 3828A USE of Adapter Plugs -115-Volt models only, OperatingInstructions Safety

Page 4

Instructions

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

USE OF EXTENSION CORDS –115-Volt models only

OperatingInstructions Safety

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 14 gauge, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 125 volts.

CAUTION:

DO NOT use an extension cord with any of the 230/208 volt models.

USE OF ADAPTER PLUGS –115-Volt models only

InstallationInstructions

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the air conditioner until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

TroubleshootingTips

CustomerService

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 3828A30036P Pub. No -7391 JRGE & You, a Service Partnership Two easy ways to register your applianceSafety Precautions OperatingInstructions Safety Read and follow this Safety Information carefullyUSE of Adapter Plugs -115-Volt models only Mode Controls About the controls on the air conditionerControls Temp ControlsAir Direction Side-to-Side Vent ControlAir Direction Up and Down Care and cleaning of the air conditioner Grille and CaseOutdoor Coils Air FilterPreparing to install the air conditioner Before You BeginElectrical Requirements Tools You Will NeedWindow Installation Instructions Parts IncludedWindow Requirements Storm Window RequirementsPrepare the Window and the Case Remove the Air Conditioner From the CaseInstall the Case in the Window Prepare the WindowSafety Instructions Operating Instructions Install the Air Conditioner in the CaseBefore you call for service… Normal Operating SoundsSafety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Air Conditioner Warranty GE Will ReplaceWhat GE Will Not Cover For The PeriodService Telephone Numbers

3828A, 30036P specifications

The GE 3828A,30036P is a sophisticated generator control system designed to enhance the performance and reliability of power generation facilities. This advanced system features an array of cutting-edge technologies and characteristics, making it a crucial component in modern energy management.

One of the standout features of the GE 3828A,30036P is its integrated digital control capabilities. This allows for precise monitoring and management of generator operations, significantly improving efficiency and reducing downtime. The system employs state-of-the-art algorithms that optimize generator performance, ensuring that it operates at peak efficiency under varying load conditions.

Another key technology incorporated into the GE 3828A,30036P is its robust telecommunications interface. This interface enables seamless communication between the generator and other components of the power infrastructure, facilitating real-time data exchange and remote monitoring. This is particularly beneficial for operators who need to maintain oversight of generator performance without being physically present at the site.

The GE 3828A,30036P also includes advanced protective features that enhance the safety and longevity of the generator. These protective mechanisms monitor key parameters such as temperature, voltage, and current, triggering alarms and safety measures if any anomalies are detected. This proactive approach helps to prevent damage to the equipment and ensures uninterrupted power supply.

In addition, the system boasts user-friendly software that simplifies the control and configuration of the generator settings. Operators can easily adjust parameters and access performance data through intuitive graphical interfaces, improving usability and reducing training time for personnel.

Furthermore, the GE 3828A,30036P is designed with scalability in mind, allowing it to be used in a wide range of applications from small standalone generators to large power generation plants. This versatility ensures that it can meet the needs of various industries, including commercial, industrial, and utility sectors.

In conclusion, the GE 3828A,30036P generator control system combines innovative technologies and essential features that enhance the reliability, efficiency, and safety of power generation operations. Its digital control capabilities, robust telecommunications interface, advanced protective features, user-friendly software, and scalability make it an essential choice for modern energy management solutions.
Top Page Image Contents