GE 3828A Care and cleaning of the air conditioner, Grille and Case, Outdoor Coils, Air Filter

Page 7

Care and cleaning of the air conditioner.

Grille and Case

Turn the air conditioner off and remove the plug

To clean, use water and a mild detergent. Do not

from the wall outlet before cleaning.

use bleach or abrasives.

Outdoor Coils

The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through your GE service outlet.

Air Filter

The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.

To remove:

 

Open the inlet grille upward by pulling out the

1

bottom of the inlet grille.

 

 

Using the tab, pull up slightly on the filter to

2

release it and pull it down.

 

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.

CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

7

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips

Customer Service

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Pub. No -7391 JR 3828A30036PTwo easy ways to register your appliance GE & You, a Service PartnershipSafety Precautions OperatingInstructions Safety Read and follow this Safety Information carefullyUSE of Adapter Plugs -115-Volt models only Temp Controls Mode ControlsAbout the controls on the air conditioner ControlsAir Direction Side-to-Side Vent ControlAir Direction Up and Down Air Filter Care and cleaning of the air conditionerGrille and Case Outdoor CoilsTools You Will Need Preparing to install the air conditionerBefore You Begin Electrical RequirementsParts Included Window Installation InstructionsStorm Window Requirements Window RequirementsRemove the Air Conditioner From the Case Prepare the Window and the CasePrepare the Window Install the Case in the WindowInstall the Air Conditioner in the Case Safety Instructions Operating InstructionsNormal Operating Sounds Before you call for service…Safety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration For The Period Air Conditioner WarrantyGE Will Replace What GE Will Not CoverService Telephone Numbers

3828A, 30036P specifications

The GE 3828A,30036P is a sophisticated generator control system designed to enhance the performance and reliability of power generation facilities. This advanced system features an array of cutting-edge technologies and characteristics, making it a crucial component in modern energy management.

One of the standout features of the GE 3828A,30036P is its integrated digital control capabilities. This allows for precise monitoring and management of generator operations, significantly improving efficiency and reducing downtime. The system employs state-of-the-art algorithms that optimize generator performance, ensuring that it operates at peak efficiency under varying load conditions.

Another key technology incorporated into the GE 3828A,30036P is its robust telecommunications interface. This interface enables seamless communication between the generator and other components of the power infrastructure, facilitating real-time data exchange and remote monitoring. This is particularly beneficial for operators who need to maintain oversight of generator performance without being physically present at the site.

The GE 3828A,30036P also includes advanced protective features that enhance the safety and longevity of the generator. These protective mechanisms monitor key parameters such as temperature, voltage, and current, triggering alarms and safety measures if any anomalies are detected. This proactive approach helps to prevent damage to the equipment and ensures uninterrupted power supply.

In addition, the system boasts user-friendly software that simplifies the control and configuration of the generator settings. Operators can easily adjust parameters and access performance data through intuitive graphical interfaces, improving usability and reducing training time for personnel.

Furthermore, the GE 3828A,30036P is designed with scalability in mind, allowing it to be used in a wide range of applications from small standalone generators to large power generation plants. This versatility ensures that it can meet the needs of various industries, including commercial, industrial, and utility sectors.

In conclusion, the GE 3828A,30036P generator control system combines innovative technologies and essential features that enhance the reliability, efficiency, and safety of power generation operations. Its digital control capabilities, robust telecommunications interface, advanced protective features, user-friendly software, and scalability make it an essential choice for modern energy management solutions.
Top Page Image Contents